Generator Set Generator Parts Deep Sea Controller Dse720

The DSE 720 automatic mains failure module has been primarily designed to
Monitor the mains (utility) supply, starting the generator automatically should it fall
Out of limits, transferring the load automatically to the generator. Once the mains
(utility) has returned the load is automatically transferred back to the mains (utility)
And the generator cooled down before it stops. If required the generator can be
Started and stopped manually.
Using the module's front panel configuration editor it is possible to alter selective
Operational sequences, timers and alarm trips. Comprehensive configuration and
Monitoring is also available using the 700 series PC configuration software for
Windows™ .

FEATURES
PC configurable
Digital and analogue inputs
Digital outputs
Automatic mains (utility) supply monitoring
Automatic shutdown or warning when fault conditions are detected
Manual start
Engine pre-heat
Engine monitoring and protection features
Protected Solid State (PSS) outputs
Front panel mounting
Front panel programming
Tamper proof engine hours counter
Remote start
LED indicators
Configurable timers
Configurable outputs
Configurable inputs
Back-lit character/icon LCD display
OPERATION
The module is operated using the front STOP/RESET, MANUAL, AUTO, TEST and START push buttons.
An additional push button next to the LCD display is used to scroll through the modules' metering displays.
CONFIGURATION
The modules can be configured using the front panel or remotely using the DSE810 interface and a PC.

As well as configuration the DSE810
Interface has the ability to provide real time diagnostic facilities.

Specifications:
DC SUPPLY: 8V to 35V continuous
CRANKING DROPOUTS: :; Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
MAXIMUM OPERATING CURRENT: 180mA at 12V. 190mA at 24V
MAXIMUMS TANDBY CURRENT: 145mA at 12V. 150mA at 24V
GENERATOR INPUT RANGE: 35V(L-N) to 333V AC (L-N) absolute maximum
50Hz - 60Hz (min 15V AC)
AUXILIARY OUTPUTS
Solid state
2.4A DC at supply voltage
FUEL/START OUTPUTS
Solid state
3.4A DC at supply voltage
GENERATOR C. T.
5A secondary 0.5VA
MAINS (UTILITY) SENSING INPUT
RANGE
35V(L-N) to 333V AC (L-N)
50Hz - 60Hz (min 15V AC)
DIMENSIONS: 209mm x 146mm x 30.3mm 8.2" x 5.7" x 1.2"
PANEL CUTOUT: 182mm x 137mm 7.2" x 5.4"
MAXIMUMPANEL THICKNESS: 8mm