Description
*The Model 5120 is an Automatic Mains Failure Module which has been designed to allow the OEM to meet demand
For increased capability within the generator industry.
*The module has been primarily designed to monitor the incoming mains supply.
*Should the mains supply fall below a configurable limit, the generator will be automatically started and the load
Transferred.
*When the AC mains supply returns to within limits, the module will then transfer back to the mains.
*The module indicates the operational status of the generator and monitors the engine parameters.
*Should a fault condition occur, the module will shut down the engine indicating any faults by means of a graphical LCD
Display and a flashing LED on the front panel.
*Selected operational timers and alarms can be adjusted by the customer.
*Micro-processor based design. Integral mains failure monitoring and load switching control.
*Automatic engine starting and stopping.
*Automatic shutdown on fault condition.
*Custom graphical icon display.
*Provides engine and generator instrumentation.
*Provides engine alarms and status information.
*Comprehensive list of timers and pre-configured sequences.
*Front panel and PC configurable inputs, outputs, alarms and timers.
*LED and LCD alarm indication.
*Compatible with 5200 series modules for easy upgrade path
Power Supply: 8 to 35 Vdc Continuous
Cranking Dropouts: Able to survive 0 V for 50mS, providing supply was at least
10V before dropout and supply recovers to 5V without the
Need for internal batteries.
Max Current Operating 320mA at 12V, 215mA at 24V;
Standby 175mA at 12V, 95mA at 24V
Start Relay Output: 16 Amp DC at supply voltage.
Fuel Relay Output: 16 Amp DC at supply voltage.
Auxiliary Relay Outputs: 5 Amp DC at supply voltage.
Charge Fail / Excitation Range: 0 V to 35 V
Alternator Input Range: 15V(ph-N) to 300V(ph-N) 3 Phase 4wire AC (+20%)
Alternator Input Frequency: 50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Mains Supply Input Range: 15V(ph-N) to 300(ph-N) 3 Phase 4wire AC (+20%)
Mains Supply Input Frequency: 50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Magnetic Pick-up Voltage Input Range: +/- 0.5 V to 70 V Peak
Magnetic Input Frequency: 10, 000 Hz (max) at rated engine speed
Operating Temperature Range: -30 to +70° C
Panel Cutout: 220mm x 160mm ( 8.7" x 6.3"
Generator Automatic Voltage Regulator |
Stamford |
Leroy Somer |
Marathon |
Mecc-Alte |
Kutai |
Marelli |
GAVR/CF/YH |
Others |
Basler |
Cat. |
SX460 |
R230 |
SE350 |
UVR6 |
EA06A |
M40FA640A |
GAVR 8A |
ST/STC gb160 gb170 |
SX440 |
R250 |
EA04C |
ACF 12A |
ST/STC(Plastic case) |
AS440 |
R438 |
EA05A |
GAVR 12A |
2~3.5 kw avr |
AS480 |
R448 |
AVC63-7 |
SR7-2G |
EA350 |
M16FA655A |
AVR 15A |
5~7.5 kw avr 186F |
MX321 |
R449 |
EA08A |
GAVR 15A |
5~7.5 kw welder 186F |
MX341 |
R450 |
AVC63-12 |
KUTAI
EG2000 |
EA16 |
VR6 |
GAVR 20A |
Lanzhou KXT-2WC avr |
R220 |
EA15A |
|
10KW avr YX3DA 2DA |
Cummins Parts |
3044196 |
3044195 |
3030256 |
3062322 |
3098693 |
3037359 |
4913742 |
3408326 |
3408324 |
4914090 |
4914091 |
3655944 |
3034572 |
3408328 |
3408329 |
3032733 |
GAC Parts |
ESD5500E |
ESD5550 |
ESD5570 |
ESD5111 |
ESD5120E |
ESD5522 |
ESD5520 |
ESD5522 |
ESD5520 |
ESD5131 |
ESD5525 |
ESD5221 |
ESD5330 |
MSP675 |
MSP676 |
MSP677 |
MSP6732C |
MSP6729 |
MSP6731 |
ADC120 12V 24V |
ADC225 12V 24V |
ADD 175 12V 24V |
MSP678 |
MSP6724 |
M16 |
DSE parts |
701AS MS |
702AS MS |
703 |
704 |
705 |
501K |
710 |
720 |
5110 |
5120 |
5210 |
5220 |
|
Generator/Genset Charger |
178A 186F |
670 |
680 |
12~24V 5A |
12~24V 3A |
12/24V 6A~10A |
Varistor and rectifier diode kit |
Leroy Somer Diode Kit 330-25777 |
Stamford Diode Bridge SSAYEC432 |
RSK1001 |
RSK2001 |
RSK5001 |
RSK6001 |
Stamford Varistor B |
Stamford Vaistor C |
MXY MXG 40-12 |
MXY MXG 30-12 |
MXY MXG 50-12 |
MXY MXG 25-15 |
MXY MXG 40-15 |
MXY MXG 50-15 |
MXY MXG 70-15 |
MXY MXG 100-15 |
MXY MXG 110-15 |
MXY MXG 150-15 |
MXY MXG 200-15 |
184/25A |
274/25A |
274/40A |
374/70A |
33025777 Varistor |