Generator Set Generator Parts Deep Sea Controller Dse5210

The DSE5210 module is operated using the front STOP, AUTO and MANUAL pushbuttons. The DSE5210 Generator Control Module includes RS232 or RS485 communications capabilities for linking to a PC, sending SMS messages and interfacing with new and existing building management systems.
Main Features:
Automatic start
Configurable inputs
Configurable outputs
Configurable alarms & timers
Digital inputs
Analogue inputs
Back-lit character LCD display
Engine protection
Front panel mounting
PC configurable
Front panel programming
Remote monitoring
RS232 or RS485 remote communications
Modbus RTU
Engine history event log
LED alarm indication
LCD alarm indication
SMS messaging
Hid till lit alarm icons
Engine exercise mode
Magnetic pick-up
BENEFITS:
- Full integration into new and
Existing building management
Systems
- In-built engine diagnostics
Removes the requirement for
Service equipment
- License free PC software
- Modules help to improve the life
Cycle of engine starter motors
- On-site module configuration to
Match user requirements
- Remote module configuration
Using PC software
- Modules send SMS messages to
Engineers to notify specific engine
Problems (GSM Modem and SIM
Card required)
- User-friendly set-up and button
Layout
Technical Data:
Power Supply: 8 to 35 Vdc Continuous

Cranking Dropouts: Able to survive 0 V for 50 mS, providing supply was at least 10 V
Before dropout and supply recovers to 5V.

Max Current: Operating 425mA at 12 V & 215mA at 24 V; Standby 250 mA at 12 V & 125 mA at 24 V.

Start Relay Output: 16 Amp DC at supply voltage.

Fuel Relay Output: 16 Amp DC at supply voltage.

Auxiliary Relay Outputs: 5 Amp DC at supply voltage.

Charge Fail / Excitation Range: 0 V to 35 V

Maximum operating current: 320ma at 12V, 215ma at 24v

Maximum operating current: 175ma at 12V, 95ma at 24v

Alternator Input Range: 15V(L-N) to 333V AC (L- N) absolute maximum

Alternator Input Frequency: 50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)

Magnetic Pick-up Voltage Input Range: +/- 0.5 V to 70 V Peak

Magnetic Input Frequency: 10, 000 Hz (max) at rated engine speed

MAINS (UTILITY) SENSING INPUT RANGE (DSE5220 only): 15V (L-N) to 333V AC (L-N) absolute maximum
MAINS(UTILITY)SENSINGINPUTFREQUENCY(DSE5220 only) 50-60 Hz:

MAINS (UTILITY) & GENERATOR LOADING

RELAY OUTPUT(DSE5220 only): 8A AC 250V

Generator loading Relay Output: 8 Amp AC 250V.

Mains loading Relay Output: 8 Amp AC 250V

Panel Cutout: 220mm x 160mm ( 8.7" x 6.3")