Generator Manufacturers and Factories

Home Generator Products Wind Energy Turbine Generator 300W (MINI 5 400W)

Wind Energy Turbine Generator 300W (MINI 5 400W)

Wind Energy Turbine Generator 300W (MINI 5 400W)
Price: Negotiable/Piece
Trade Terms: FOB,CIF,EXW
Min Order: 1/Piece
Pay Type: L/C,T/T
Small horizontal wind turbines 300W
Supplying power to communication base station and forest fire monitoring. At present, communication base station get the power from government gird, diesel generator supply the power and saved at the battery for feedback. As the station is at the remote area, it get the power at the village, but with bad stabilization, long cable, bad realization. Guangzhou Sunning can supply the system to the station, it can install anywhere, easy installation, cost cheaper, also can design different system for different requirement.

Wind solar hybrid system is combined with wind turbine, solar panel, controller, inverter, cables and some other components. In dark or rainy, the wind turbine could generate the power, and the solar panel could generate in sunny, when there is wind and sunshine, both of them could generate power, wind solar system will much better than use one of them only. System composed of the following:

Mini small wind generator characteristics:
1. Low start-up wind speed
Low wind speed series small wind turbines generate more than 30% effective power than the same rotor diameter wind turbine annually.
2. High-efficient generator system
Three-phase permanent magnet synchronous small wind generator, more than 10% of the efficiency of ultra-GB, starting resistance, only be 1/3 of the GB limit, motor insulation rating class h insulation.
3. MPPT power management system
Built-in a new intelligent controller, monitoring the wind turbines operation in real-time MPPT(maximum power point tracking) charge.
4. Noise reduction innovative technology
Start and product electricity at the 1.5m/s, noise only at dB at 13m/s/.
5. Perfect wind wheel system
The wind turbine generator wheel are made of a low temperature resistance, aging high strength compound material, can cope with a variety of complex wind conditions, charge wind energy into electrical energy efficiently and sustainably...
6. Unique design of the rudder
Small wind turbine generator rudders are ale to respond to the wind speed and wind direction flexibly, enhancing the efficiency of power generation.

Small wind turbine generator selections
Technical specifications
1 selection of mini series wind turbine
Mini series wind turbine is applicable to various-climate regions. Please fully consider the surrounding environment resources to bring the best performance while selection of mini wind turbine.
1.1 wind speed: Low wind speed wind turbine could effectively utilize wind energy from low wind speed region, it's recommended to use low wind speed model in no hurricane areas with annual wind speed of less than 3.5m/s.
1.2 environmental temperature: It's recommended to use low-temperature type at regions where minimum temperature is less than -10º C
Keywords:
Wind turbine, wind generator, wind turbine generator, small wind turbine, small wind generator, windmill generator, mini wind turbine, wind energy, wind power, wind power home system, wind energy home system, wind solar hybrid power, wind turbine
 
Rated Capacity 300 watts at 28 mph (12.5 m/s)
Max Capacity 350watts
Rotor Diameter 1.21m
Weight 6.8 kg
Shipping Dimensions 770x 410x 200 mm (8.8kg)
Mount 1.5 in schedule 40 1.9 in (48 mm) OD pipe
Start-Up Wind Speed 1.5 ( m/s)
Cut-In Wind Speed 2.0(m. s)
Voltage 12, 24 VDC
Turbine Controller Microprocessor-based smart internal regulator with Maximum Power Point Tracking
Body Cast aluminum
Blades 5 PC Nylon Fiber
Overspeed Protection Electronic torque control
Kilowatt Hours per Month 32KWh/mo at 3.2 m/s
Survival Wind Speed 50 m/s
Warranty 3 year limited warranty
 
Prod Model: MINI 5 400W
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Rated Outpower: 400W
Max Outpower: 450W
Rotor Diameter: 1.21m
Start-up Wind Speed: 1.5 ( M/S)
Cut-in Wind Speed: 2.0(M/S)
Voltage: 12, 24 VDC
Wind Turbine Controller: MPPT Charge Controller System
Kilowatt Hours Per Month: 40 Kwh/Mo at 3.2 M/S
Weight: 7.1 Kg
Certificate: CE RoHS ISO
Rotating Shaft: Horizontal
Number Of Blade: Multiple-Blade
Stress Way Of Blade: Resistance
Guangzhou SUNNING Wind Power Generator Co., Ltd is a high energy saving technology company which focus on research, development, production and sales of small wind turbine. OEM service is available. With years experience, advanced technology, professional team and long standing friendly relationship with domestic and overseas cooperation, we make a great contribution into energy saving and environmental protection business. Our company achieve the non-pollution goal through our perfect after-sale service and rational price system. The system in widely used in street, landscaping, Residential lighting, monitoring, the communication base station, sailboat, etc. The occasion is a time when the global renewable energy universal application, wind and solar energy industry has entered the era of rapid development, the company is willing to work with the community of people with lofty ideals to a win-win situation, seek common development, and create a better tomorrow. WEBSITE: Www. Sunningwind. COM

Send your message to this manufacturer

  • Guangzhou Sunning Windpower Generator Co., Ltd.

More >

Other Generator Products with This Manufacturers

About Us Generator Products Generator Manufacturers Hot Generator Generator News Generator Trade Shows Site Partners Contact Us Sitemap