LPG Generator Set

Rated Speed	1500RPM/1800RPM
Rated Frequency	50/60Hz
Rated Voltage	220/380V,230/400V,110/220V,240/416V, 254/440, 277/480V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw.h
Lubricant consumption	≤1.0g/kw.h
cliyder namer	12 or 6
Starting System	DC 24V electric motor
Cooling method	water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Chinese Stamford
Power Factor	0.8 lagging
Exciting method	brushless
Colour	your choice
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
overhual time	more than 3000hours
intake mode	natural intake
sparking mode	sparking pl
noise	less than 105dB(A)
exhaust temperature	less than 650C Conditions for Using 1. The temperature of the gas should not surpass 40°C when the distance between the gas and the pressure regulating valve for air inflow is 1m. 2. The range of the pressure that this natural gas generator set can sustain should be 3kpa-10kpa and the fluctuated frequency should not surpass 1kpa/min. 3. The content of the methane in the natural gas should not be lower than 45% and its fluctuated frequency should not surpass 2%/min. 4. The content of H2S should not surpass 200mg/Nm³. 5. The granularity of the impurity should not surpass 5µm and the content of the impurity should not surpass 30mg/Nm³. 6. The content of water in biogas used in this  natural  gas generator set should not surpass 40g/Nm³. 7. For natural gas with methane of about 70%-90%, low density natural gas generator should be used. For those gases which cannot reach the conditions above, this biogas generator set should be specially allocated after evaluation according to the specified composition, pressure, temperature, etc, provided.

Service commitment:
1.pre-sale service:
We will send our engineer to prospect the site of power station free to charge.According to the situation of site we can supply you many drawings which can meet the requirement of design and construction,like power station floor plan,engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
2.Sale service:
we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.We will debug the generator set till it can generate power successfully.We will also supply a technical training to the operators.You also can send your staff to our company.We can train you till you can operate the generator set and during this time we can offer you board and lodging free of Charge.
3.After-sale service:
(1)in our company, different people is in charge of different area,we will response periodically and support you technical service free of charge,include equipment debugging,fault eliminating,technical advice,maintenance assistant,etc.
(2)For the quality problem, we will service for you free of charge during the guarantee period.
(3)One year guarantee period and lifetime service.

(4)Insisting on principle of "solving problems first,trying to recover the generator set as soon as possible and then analysis the reason",we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.

We aslo supply spare part service:
1.Application scope of the Accessories,such as 12v190,8v190,6190,6135 and other engine types
2.All parts were from original factories or professional factories,complete in specification,keep good quality