Nitrogen Generator (ANS-1670B/DN)
Features:
1. Semi-automatic operation system
2. With independent vacuum generation and N2 inflation device
3. Raw material from compressed air
4. Automatic Nitrogen generator
5. Automatic shut-off after nitrogen generation
6. Two Sets of large capacity CMS filter
7. One Stage pre-filters for water/oil seperator
8. Optional: 130L external N2 tank
9. Quick coupler to connect the "Vacuum Generator & N2 Inflator device " with the machine by two 10meters length hoses
10. With 70L N2 tank
|
Model No.: |
ANS-1670B/DN |
|
Product Name |
Nitrogen Generator & Inflator Machine |
|
Suit For: |
Car & Light Truck |
|
Power Supply: |
110/220V± 10%, 50/60Hz |
|
Power Consumption: |
30W |
|
Nitrogen Generated: |
PSA Technology |
|
Nitrogen Purity: |
95~99% |
|
Air Inlet Pressure: |
9~10kg/cm2; 130~145PSI |
|
Air compressor required: |
5.5~7.5kw, 10kg/cm2, Exhaust volume: 0.6~1.5M3/min, |
|
Nitrogen Outlet Pressure: |
6~8kg/cm2; 85-115PSI |
|
N2 Output Capacity: |
60~70L/Min; 15.8-18.5Gallon/Min, 2.1~2.5CFM |
|
N2 Tank Capacity: |
70L/18.5Gallon inside |
|
Measure Unit: |
KG/CM2 & PSI |
|
Max. Pressure for N2 Tank: |
13.5KG/CM2 |
|
Sensor Precision: |
5PSI |
|
Operating Temperature: |
0-50° C, 0-122° F |
|
Standard Accessories: |
Two 10m length pu hoses+Vaccum Generator & N2 Inflator device |
|
Optional: |
High Precision Water/Oil vapour Filter, Automatic water drain-out Filter |
|
Packing & N. W. /G. W.: |
745*550*1500MM (29.3*21.7*59.1inch); 103/127kgs(227.1/280LBS)wooden case |
|
20ft/40ft container: |
51PCS/102PCS |
Guangzhou Anisun Automotive Testing Equipment Co., Ltd. was founded in 2003. It is restructured by Chinese American Mr. Oliver Investment and Anisun in 2007, and set up a joint venture company in Guangzhou. We are researching and manufacturing vehicle testing equipment and testing controlling management system. Our main products includes computer wheel alignment, automobile chassis dynamometer, automobile brake tester, axle loading tester, side sliding tester, speedometer tester, suspension vibration tester, torque angle indicator, wheel partial tester, and so on. We are also sales agents for automobile testing equipments: Light detectors, gas analyzers, opacity smoke meters and other equipment.
Our factory is located in Jiangsu province; its area is more than 12000 square meter. It consists raw-materials workshop, finish machining workshop, welding workshop, treatment workshop, painting/baking workshop, assembling workshop, electrical and electronic controlling production workshop, and testing equipment workshop. We have special R& D department with a group of professional and technical staff.
