Nitrogen Generator (ANS2670)
New Function Introduction
3 Unites for Bar, PSI, KGF
STD mode: Standard mode for pressure set-up and N2 inflation.
OPS mode: Over-Pressure inflation function, pressure set-up from 0~1.5kgs more than required tyre pressure.
N2P mode: Air purge function for nitrogen inflation & air purge in order to increase the higher purity of nitrogen inside of tyre. Purge cycle from 0~10 times for choice.
OPS + N2P: Over pressure system plus nitrogen inflation & air purge system.
MAN: Manual operation mode.
Air inflation and nitrogen inflation converse function.
Equipped with nitrogen purity adjust valve(flow-rate valve) near the computer board.
Automatic alarm system for any error with indicator shining at the same time.
Description:
Full Automatic W/LCD
Larger LCD digital display
Automatically test and control with an upgraded computer board
Equipped with high precision water/oil filter & separator
Equipped with full automatic water/oil filter & separator
Double-level filtration help prolong the lifetime of main part inside
Equipped with metal button prolong the lifetime of the keyboard
Equipped with independent backup system for computer
|
Suit For: |
Car & Light Truck |
|
Power: |
220V± 10%, 50/60Hz |
|
Nitrogen Generated: |
Through high quality filtration |
|
Nitrogen Purity: |
95~99% |
|
Air Inlet Pressure: |
9~10kg/cm2; 130~145PSI |
|
Air compressor required: |
5.5~7.5kw, 10kg/cm2, 0.6~1.5M3/min, |
|
Nitrogen Outlet Pressure: |
6~8kg/cm2; 85-115PSI |
|
N2 Output Capacity: |
60~70L/Min; 15.8~18.5Gallon/Min |
|
N2 Tank Capacity: |
70L/18.5Gallon inside |
|
Standard Accessories: |
2pcs of 10M Inflating Hoses |
|
Dimension: |
710*520*1390MM |
|
N. W. /G. W. |
105/111KGS |
Guangzhou Anisun Automotive Testing Equipment Co., Ltd. was founded in 2003. It is restructured by Chinese American Mr. Oliver Investment and Anisun in 2007, and set up a joint venture company in Guangzhou. We are researching and manufacturing vehicle testing equipment and testing controlling management system. Our main products includes computer wheel alignment, automobile chassis dynamometer, automobile brake tester, axle loading tester, side sliding tester, speedometer tester, suspension vibration tester, torque angle indicator, wheel partial tester, and so on. We are also sales agents for automobile testing equipments: Light detectors, gas analyzers, opacity smoke meters and other equipment.
Our factory is located in Jiangsu province; its area is more than 12000 square meter. It consists raw-materials workshop, finish machining workshop, welding workshop, treatment workshop, painting/baking workshop, assembling workshop, electrical and electronic controlling production workshop, and testing equipment workshop. We have special R& D department with a group of professional and technical staff.
