Nitrogen Generator & Inflator Machine (ANS1690A)
Raw material from compressed air
Automatic Nitrogen generator
Automatic shut-off after nitrogen generation
Two Sets of large capacity CMS filter
Two Stage pre-filters for water/oil seperator
Automatic vacuum generator to exact air out from the tyre
Automatic tyre inflation under set-up pressure
Automatic alarm for any error and work finish
Record last time setting data
Audible and visual of end of nitrogen generation and inflation
High precision and full automatic water/oil seperator, it can drain the water out automatically at any time
Large backlight LED for indicate pressure, time & nitrogen purity
Equipped with independent backup system for computer
With 90L N2 tank
|
Suit For: |
Car & Light Truck |
|
Power Supply: |
110/220V± 10%, 50/60Hz |
|
Power Consumption: |
30W |
|
Nitrogen Generated: |
PSA Technology |
|
Nitrogen Purity: |
95~99% |
|
Air Inlet Pressure: |
9~10kg/cm2; 130~145PSI |
|
Air compressor required: |
5.5~7.5kw, 10kg/cm2, Exhaust volume: 0.6~1.5M3/min, /Min |
|
Nitrogen Outlet Pressure: |
6~8kg/cm2; 85-115PSI |
|
N2 Output Capacity: |
70~80L/Min; 18.5-21Gallon/Min, 2.5~2.8CFM |
|
N2 Tank Capacity: |
90L/24Gallon inside |
|
Measure Unit: |
Bar & PSI |
|
Max. Pressure for N2 Tank: |
13.5KG/CM2 |
|
Sensor Precision: |
1PSI |
|
Operating Temperature: |
0-50° C, 0-122° F |
|
Standard Accessories: |
Automatic hose-reel |
|
Packing & N. W. /G. W.: |
745*550*1500MM (29.3*21.7*59.1inch); 128/152kgs(282.2/335.1LBS)wooden case |
|
|
710*530*1410mm (28*20.9*55.5inch); 128/131kgs(282.2/288.8LBS) carton box |
|
20ft/40ft container: |
51PCS/102PCS |
|
Feature |
|
Guangzhou Anisun Automotive Testing Equipment Co., Ltd. was founded in 2003. It is restructured by Chinese American Mr. Oliver Investment and Anisun in 2007, and set up a joint venture company in Guangzhou. We are researching and manufacturing vehicle testing equipment and testing controlling management system. Our main products includes computer wheel alignment, automobile chassis dynamometer, automobile brake tester, axle loading tester, side sliding tester, speedometer tester, suspension vibration tester, torque angle indicator, wheel partial tester, and so on. We are also sales agents for automobile testing equipments: Light detectors, gas analyzers, opacity smoke meters and other equipment.
Our factory is located in Jiangsu province; its area is more than 12000 square meter. It consists raw-materials workshop, finish machining workshop, welding workshop, treatment workshop, painting/baking workshop, assembling workshop, electrical and electronic controlling production workshop, and testing equipment workshop. We have special R& D department with a group of professional and technical staff.
