Prod Model: |
MINI-400W 24V |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Rated Outpower: |
400W |
Max Outpower: |
450W |
Rotor Diameter: |
1.21m |
Start-up Wind Speed: |
1.5 ( M/S) |
Cut-in Wind Speed: |
2.0(M/S) |
Voltage: |
24 VDC |
Wind Turbine Controller: |
MPPT Charge Controller System |
Kilowatt Hours Per Month: |
32 Kwh/Mo at 3.2 M/S |
Weight: |
6.8 Kg |
Certificate: |
CE RoHS ISO |
Rotating Shaft: |
Horizontal |
Number Of Blade: |
Multiple-Blade |
Stress Way Of Blade: |
Resistance |
Product Description
Grid Tied 400W Wind Turbine Generator for Farm(MINI-400W 24V)
For agriculture, irrigation is the most important for plants. Previously, always use the backward technology of broad irrigration. But now, with the situation of water become less and less, and the demand of water is higher and higher, so the broad irrigration will be replaced by the modern irrigration.
The modern irrigration technology, it is combined with different modern technology, using the wind solar intelligence system to control the irrigration time and supply power to whole system. As the wind and sunshine is clean and free energy, everybody could get it from nature. When there is wind and sunshine, the intelligence system could generate power and save at the batteries. Also, it is efficiently to make good use of the water resource and promote the growth of crops, it will meet the economic and social benefits together.
Of course, using the modern wind solar intelligence system, it will replace the human watering, as the farm usually be Vast territory, it is difficult to brige the government grid, so intelligence irrigration system will be very good for the the vast
Mini small wind generator characteristics:
1. Low start-up wind speed
Low wind speed series small wind turbines generate more than 30% effective power than the same rotor diameter wind turbine annually.
2. High-efficient generator system
Three-phase permanent magnet synchronous small wind generator, more than 10% of the efficiency of ultra-GB, starting resistance, only be 1/3 of the GB limit, motor insulation rating class h insulation.
3. MPPT power management system
Built-in a new intelligent controller, monitoring the wind turbines operation in real-time MPPT(maximum power point tracking) charge.
4. Noise reduction innovative technology
Start and product electricity at the 1.5m/s, noise only at dB at 13m/s/.
5. Perfect wind wheel system
The wind turbine generator wheel are made of a low temperature resistance, aging high strength compound material, can cope with a variety of complex wind conditions, charge wind energy into electrical energy efficiently and sustainably...
6. Unique design of the rudder
Small wind turbine generator rudders are ale to respond to the wind speed and wind direction flexibly, enhancing the efficiency of power generation.
Wind turbine siting
Small changes in wind speed and wind direction can have a dramatic effect on power production. In general, the higher the tower, the greater the wind speed and ultimately power production. Therefore, the siting of your wind turbine shouldbe carefully considered. Each installation is different and is often a compromise among tower height, distance from the battery bank, local zoning requirements and obstacles such as buildings and trees.
Keywords:
Wind turbine, wind generator, wind turbine generator, small wind turbine, small wind generator, windmill generator, mini wind turbine, wind energy, wind power, wind power home system, wind energy home system, wind solar hybrid power, wind turbine inverter wind turbine
|
Rated Capacity |
400 watts at 28 mph (12.5 m/s) |
Max Capacity |
450watts |
Rotor Diameter |
1.21m |
Weight |
6.8 kg |
Shipping Dimensions |
770x 410x 200 mm (8.8kg) |
Mount |
1.5 in schedule 40 1.9 in (48 mm) OD pipe |
Start-Up Wind Speed |
1.5 ( m/s) |
Cut-In Wind Speed |
2.0(m. s) |
Voltage |
24 VDC |
Turbine Controller |
Microprocessor-based smart internal regulator with Maximum Power Point Tracking |
Body |
Cast aluminum |
Blades |
5 PC Nylon Fiber |
Overspeed Protection |
Electronic torque control |
Kilowatt Hours per Month |
32KWh/mo at 3.2 m/s |
Survival Wind Speed |
35 m/s |
Warranty |
3 year limited warranty |
Guangzhou SUNNING Wind Power Generator Co., Ltd is a high energy saving technology company which focus on research, development, production and sales of small wind turbine. OEM service is available. With years experience, advanced technology, professional team and long standing friendly relationship with domestic and overseas cooperation, we make a great contribution into energy saving and environmental protection business. Our company achieve the non-pollution goal through our perfect after-sale service and rational price system. The system in widely used in street, landscaping, Residential lighting, monitoring, the communication base station, sailboat, etc. The occasion is a time when the global renewable energy universal application, wind and solar energy industry has entered the era of rapid development, the company is willing to work with the community of people with lofty ideals to a win-win situation, seek common development, and create a better tomorrow. WEBSITE: Www. Sunningwind. COM