high energy saving QM-2 coal gasifier
Single stage Coal gasifier series:
A new generation of intelligent high-effect environment-friendly products put forward by our company, which have developed from and taken good advantage of dry-type ash-disposal coal gasifier, in which patent deslagging structure is use
Characteristics of coal gasifier:
Our new type coal gasifier use special ash pan, furnace wall always protected by slags, strong effect of slag damaging, slag loosing and ventilation, disposing fundamentally the concept that gas furnace is the same as pressure vessel, heating temperature auto-controlled
Widely used in the environment-friendly and energy-saving technological renovation of gas-processing heating furnace, gas forging furnace, gas crucible furnace, gas mold furnace, grilled ladle gas furnace, sand resin heating gas generator, glass melting gas furnace, ceramic gas furnace, as well as smoke exhausting refractory kiln and tunnel kiln
full-automatic to remove slags coal gasifier:
QM-2 wet-type slag removing coal classifier series if placed on ground level, ashes can be disposed conveniently, and humane operation is guaranteed
This series coal gasifier to continual and cyclical manufacturing at the same time 24 hours a day of continuous work, without stopping to remove slags a Java-air distribution, once-and-for-all air distribution
After simple training , coal gasifier easy to operation:
coal adding time by the temperature degree indication at the gas exit, needless of operation experience.This type coal gasifier adding coal and coa drags out are full-automatic,so easy operation.
Long service time:
Our special design coal gasifier used a unique pagoda-style heat-resistant cast iron furnace grate with once-and-for-all air distribution at the same time cooling the grate, the temperature of which maintained at between 150 and 25°C and the service time of the grate largely extended
Maintenance easy:
all the components of the furnace body are weld parts, so one welder is enough to complete furnace maintenance on the spot and the repairing time is short if a hole is reserved in advance from which the repairman can enter conveniently, all the repair work can be done inside without dismantling the body and 8 hours is enough to finish the all maintenance tasks which will not affect the peak production
The coal gasifier after to use:
safety is the lifeline of the enterprise, so the safety of the equipment chosen has been paid closest attention at all the slag removing places of QM-2 coal gasifier, extensive water seal explosion preventing grooves are set pervasively at the time of pressure rising, the pressure can be released in time and the explosion protection is delicate and effective
This is the first safety control
The second safety control is dedicated gas releasing and exhausting equipment, which should be opened when the furnace stops in order to exhaust the gas gathered in the main pipe and prevent the gas from being sucked back into the bore to explode when meeting fire
Uniform combustion:
it has strong ability to break slags, which drop evenly along the circle of the slag pan, coal layers move downwards and does not lead to uneven coal burning as a result of the uneven seam density of coal
Uniform coal distribution: at the coal adding place spacing devices were installed to prevent the cone valve from deviating resulting in uneven coal burning
Special pagoda-type grate ventilation system, with more uniform air distribution, more uniform and thorough combustion, direct combination of vapor acting as gas agent with air, vapor used more completely and classification rate improved more efficiently to over 90%
QM-2 COAL GASIFIER SPECIFICATON items | unit | type & certification |
|
| QM0.8 | QM1.0 | QM1.2 | QM1.5 | QM1.6 |
I.D.of chamber | mm | 800 | 1000 | 1200 | 1500 | 1600 |
Hearth effect area | M2 | 0.5 | 0.785 | 1.13 | 1.77 | 2.01 |
Applicable fuel | Non-caking or weak-caking anthracite, bituminous coal, coke, coal property should comply with the requirement of GB9143 |
Fuel size | mm | 13-25 25-50 |
Fuel consumption | Kg/h | 40~100 | 70~140 | 120~190 | 160~350 | 350~460 |
Air agent | Air, stream |
Gas output | Nm3/h | 140~350 | 245~490 | 420~670 | 560~1200 | 1200~1600 |
Net heating value | Kj/Nm3 | 5020~5670 (related to coal sorts) |
Gas exit temperature | ºC | 300-500 |
Gas exit pressure | Pa | <1000 |
Air pressure | Pa | <3000 |
Saturated temperature | ºC | 50-60 |
Ash tray speed | R/H | 0.177-1.77 |
Air entrance diameter | mm | 108 | 108 | 133 | 165 | 219 |
Complete machine power | kw | <6 | <6 | <6 | <7 | <8 |
Equipment weight | T | 3.5 | 4.5 | 5 | 7.5 | 10 |
Henan Sunstrike Machinery&Equipment Co., Ltd is a professional manufacture of E-waste treatment equipment and mining equipment. Our main products include waste PCB recycling machine, aluminum plastic board recycling machine and coal&mineral powder briquette machine, wood pellet machine, biomass briquette machine, wood chipper, sawdust dryer etc, which is a joint-stock enterprise integrated R&D, manufacture and marketing. The company is located in Mazhai Machinery Industrial Park. Equipped with modern mechanical processing equipment and advanced three-dimensional design& simulation test system. A team of 26 R&D engineers make sure of our most up-to-date technology and innovation, the R&D cost shares up to 10% of our net profit each year. After nearly 10 years of growth, we are now among the top leaders in this field and own two production bases in zhengzhou city, which has the biggest mining equipment manufacturing base in China.
We are one of a few enterprises in this field who had passed the CE certification and ISO9001: 2008 international quality management system certification. Moreover, we own independent import&export right of PRC. Strict quality control procedure ensures our product quality, the production capacity ensures our on time delivery, so far, we have our customers from 106 countries and our products are well sold in domestic and abroad markets with deeply trusted by customers.
With the strong technical force, highly cooperative team, exquisite fabrication technology and perfect after-sales service system to provide customers with timely and thoughtful service. We believe that the satisfaction of customers is our drive of progress. "Win together with customer" is the true principle we should persist forever. We sincerely hope that we can create brilliant future together.