GAC ESD5500e Speed Controller Electronic Governor for Generator Diesel

GAC ESD5500E speed controller electric governor for generator diesel

Diesel generator speed governor ESD5500E
1. One year warranty
2. Fast delivery time
3. In stock, manufactory
4. Made in china

1. Introduction
The ESD5500E /5520ESeries speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.
(ESD5520E is designed for CUMMINS EFC series. )
Isochronous Operation/Steady Stability---- +/-0.25% or better
Supply----12 or 24 VDC Battery Systems(transient&reverse voltage protected)
Power Consumption----50 ma continuous plus acutator current
Maximum Actuator Current at 25celsius (77celsius F)----10 Amps continuous

2. Technical data:
ESD5500


Input
Supply
12 or 24 VDC Battery System (Transient and Reverse Voltage)
Polarity
Negative Ground (Case Isolated)
Power Consumption
50 ma continuous plus actuator current
Actuator Current Range @ 25 Deg. C - (Inductive Load)
Min. 2.5 Amps; Max. 10Amps continuous
Speed Sensor Signal
0.5-120 Volts RMS
Performance
Isochronous Operation/Steady State Stability
± 0.25% or better
Speed Range/Governor
1K to 7.5K Hz continuous
Speed Drift with Temperature
± 1 Max
Idle Adjust CW
60% of set speed
Idle Adjust CCW
Less than 1200 Hz.
Droop Range
1-5% regulation
Droop Adj. Max. (K-L Jumpered)
400 Hz., ± 75Hz. Per 1.0A change
Droop Adj. Min. (K-L Jumpered)
15Hz., ± 6Hz. Per 1.0A change
Speed Trim Range
± 200 Hz
Remote Variable Speed Range
500 - 7.5 Hz. Or any part there of
Terminal Sensitivity J
100 Hz., ± 15Hz / Volt @ 5.0 K Impedance
Terminal Sensitivity L
735 Hz., ± 60 Hz / Volt @ 65 K Impedance
Terminal Sensitivity N
148 Hz., ± 10 Hz / Volt @ 1 Meg. Impedance
Terminal Sensitivity P
10 VDC Supply @ 20 ma Max
Environmental
Ambient Operating Temperature Range
-40 to +85 Deg. C
Relative Humidity
Up to 95%
All Surface Finishes
Fungus Proof and Corrosion Resitant
Reliability
Vibration
1G at 20 to 100 Hz.
Testing
100% Functionally Tested