Generator Controller Deep Sea 704 Automatic Engine Control Module

Generator controller deep sea 704 automatic engine control module

Deep sea controller module 704
1. One year warranty
2. Fast delivery time
3. In stock, manufactory
4. Made in China

1. Introduction
704 Alternator Regulator
DSE704 for brushless generator
Generator Engine Control Unit
Reasonable Price and Good Quality

The DSE704 is an Auto Mains Failure Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start, charge failure, over speed and under speed. When the module detects a fault condition it automatically shuts down the engine. The module also includes two user configurable auxiliary inputs. The module has been designed to automatically start the generator when the mains (utility) power fails. As soon as mains (utility) power is restored the module has been designed to transfer the load back to the mains (utility) supply. The module then instructs the engine to begin the cool down procedure and stopping sequence (user configured).

2. Technical data:
DSE 704
Power Supply
8 to 35 Vdc Continuous
Cranking Dropouts
Able to survive 0 V for 50 mS, providing supply was at least 10 V
Before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
Max Current
Operating 50mA; Standby 10mA
AlternatorInputRange
75(ph-N) to 277(ph-N) 3 Phase 4wire AC (+20%)
Alternator Input Frequency
50 - 60 Hz at rated engine speed (Minimum: 75V AC Ph-N) (Crank
Disconnect from 15V Ph-N @ 20Hz) Overspeed +14% (+24% overshoot)
Underspeed -20%
Start Output
1.2 Amp DC at supply voltage
Fuel Output
1.2 Amp DC at supply voltage.
Auxiliary Outputs
1.2 Amp DC at supply voltage
Charge Fail
12V = 8V CF 24V = 16V CF
Operating TemperatureRange
-30 to +70° C