Deep Sea Controller Dse501k, Dse3110, Dse5110, Dse5120

DSE501K

1)INTRODUCTION: 
DSE501K is a Manual Engine Control Module, which has been designed to manually control the engine via a key switch on the front panel. The module is used to start and stop the engine, indicating fault conditions; automatically shutting down the engine and indicating the engine failure by LED giving true first up fault annunciation. 

 
2) SPECIFICATION:
A. DC Supply----9~33V continuous.
B. Alternator Input Range----15~305V AC RMS
C. Alternator Input Frequency---- 50~60Hz at rated engine speed.
D. Magnetic Input Range----0.5V~+/-80V
E. Magnetic Input Frequency----2300Hz~6000Hz
F. Start Relay Output----16 Amp DC at supply voltage
G. Run Relay Output----16 Amp DC at supply voltage
H. Alarm Output----1Amp DC at supply voltage
I. Operating Temperature Range----- -30~70celsius

 
3)TECHNICAL DATA:

Power Supply	9 to 33 Vdc Continuous
Cranking Dropouts:	Able to survive voltage dips during cranking. Without  The need for internal batteries.
Alternator Input Range	15 - 305 V AC RMS
Alternator Input Frequency:	50 - 60 Hz at rated engine speed
Magnetic Input Range	0.5 V to +/- 80 V
Magnetic Input Frequency	2300Hz to 6000 Hz at rated engine speed
Start Relay Output:	16 Amp DC at supply voltage
Run Relay Output:	16 Amp DC at supply voltage
Alarm Output	1 Amp DC at supply voltage
Operating Temperature Range:	-30 to +70°C

 
DSE3110


The DSE3110 can be utilised as a Manual or Auto Start Module for single gen-set applications or engine only applications. The module has been designed to work with electronic and non-electronic engines, providing advanced engine monitoring and protection features.
 
The DSE3110 includes a back-lit icon LCD display which clearly shows the status of the engine at all times.
 
The module has been designed to combine a maximum of 16 generators and 16mains (utility)
supplies up to a maximum of 20 in one system, e.g. 16 generators and 4mains (utility) supplies (DSE5560 required to synchronise with the mains).


DSE5110

The module DSE5110 is used to automatically start and stop the engine,indicating the operational status and faultconditions by means of an LCD display and a flashing LED on the front panel.

Power Supply	8 to 35 Vdc Continuous
Cranking Dropouts:	Able to survive 0 V for 50 mS, providing supply was at least 10 V  before dropout and supply recovers to 5V.
Max Current	Operating 425mA at 12 V & 215mA at 24 V; Standby 250 mA at 12 V & 125 mA at 24 V.
Start Relay Output:	16 Amp DC at supply voltage.
Fuel Relay Output:	16 Amp DC at supply voltage.
Auxiliary Relay Outputs:	5 Amp DC at supply voltage.
Charge Fail / ExcitationRange	0 V to 35 V
Maximum operating current	320ma at 12V, 215ma at 24v
Maximum operating current	175ma at 12V, 95ma at 24v
AlternatorInputRange:	15V(L-N) to 333V AC (L- N) absolute maximum
Alternator Input Frequency:	50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Magnetic Pick-upVoltageInputRange:	+/- 0.5 V to 70 V Peak
Magnetic Input Frequency:	10,000 Hz (max) at rated engine speed
MAINS (UTILITY) SENSING INPUT RANGE	(DSE5220 only) 15V (L-N) to 333V AC (L-N) absolute maximum
MAINS(UTILITY)SENSINGINPUTFREQUENCY	(DSE5220 only) 50-60 Hz
MAINS (UTILITY) & GENERATOR LOADING RELAY OUTPUT	(DSE5220 only) 8A AC 250V
Generator loading Relay Output:	8 Amp AC 250V.
Mains loading Relay Output:	8 Amp AC 250V
Panel Cutout:	220mm x 160mm ( 8.7" x 6.3")

 
DSE5120


1.Introduction

*The Model 5120 is an Automatic Mains Failure Module which has been designed to allow the OEM to meet demand
for increased capability within the generator industry.
*The module has been primarily designed to monitor the incoming mains supply.
*Should the mains supply fall below a configurable limit, the generator will be automatically started and the load
transferred.

2.Technical data:
 

Power Supply	8 to 35 Vdc Continuous
Cranking Dropouts:	Able to survive 0 V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V without the need for internal batteries.
Max Current	Operating 320mA at 12V, 215mA at 24V; Standby 175mA at 12V, 95mA at 24V
Start Relay Output:	16 Amp DC at supply voltage.
Fuel Relay Output:	16 Amp DC at supply voltage.
Auxiliary Relay Outputs:	5 Amp DC at supply voltage.
Charge Fail / Excitation Range	0 V to 35 V
Alternator Input Range:	15V(ph-N) to 300V(ph-N) 3 Phase 4wire AC (+20%)
Alternator Input Frequency:	50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Mains Supply Input Range:	15V(ph-N) to 300(ph-N) 3 Phase 4wire AC (+20%)
Mains Supply Input Frequency:	50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Magnetic Pick-up Voltage Input Range:	+/- 0.5 V to 70 V Peak
Magnetic Input Frequency:	10,000 Hz (max) at rated engine speed
Operating Temperature Range:	-30 to +70°C
Panel Cutout:	220mm x 160mm ( 8.7" x 6.3"