Deep Sea Controller Dse 703, Dse704, Dse705, Dse6110, Dse6120, Dse 7210, Dse7220, Dse7310, Dse7320 etc. )

DSE704

The DSE704 can be utilised as a Manual or Auto Start Module for single gen-set applications or engine only applications. The module has been designed to work with electronic and non-electronic engines, providing advanced engine monitoring and protection features.

Power Supply	8 to 35 Vdc Continuous
Cranking Dropouts:	Able to survive 0 V for 50 mS, providing supply was at least 10V  Before dropout and supply recovers to 5V.   This is achieved without the need for internal batteries.
Max Current	Operating 50mA; Standby 10mA
Alternator Input Range	75(ph-N) to 277(ph-N) 3 Phase 4wire AC (+20%)
Alternator Input Frequency:	50 - 60 Hz at rated engine speed (Minimum: 75V AC Ph-N) (Crank  Disconnect from 15V Ph-N @ 20Hz) Overspeed +14% (+24% overshoot)  Underspeed -20%
Start Output:	1.2 Amp DC at supply voltage
Fuel Output:	1.2 Amp DC at supply voltage.
Auxiliary Outputs	1.2 Amp DC at supply voltage
Charge Fail	12V = 8V CF 24V = 16V CF
Operating Temperature Range:	-30 to +70°C

DSE705

 The DSE705 is an automatic engine control module, designed to provide advanced load share functionality for diesel and gas generating sets that include non-electronic and electronic engines. The module aslo provides excellent engine monitoring and protection features.

FEATURE
Automatic mains (utility) supply monitoring 
Load changeover control 
Manual start
Protected Solid State (PSS) outputs 
Front panel mounting  
Front panel programming 
Remote start input
LED indicators
Configurable timers
Single/three phase mains (utility) sensing

DSE710

The dse electric plc 710, DSE710 is an Automatic Start Control Module that offers an advanced range of engine monitoring and protection features. The module has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine coolant temperature, engine running hours and battery volts. The module also displays the engine speed. When the module detects a fault condition it automatically shuts down the engine and indicates the exact fault on the modules LCD display or relevant LED indicator.   The module can be configured using the front panel or via the DSE810 interface and a PC. The module can also be controlled from a PC that is located up to 100 meters away.

Power Supply	8 to 35 Vdc Continuous
Cranking Dropouts:	Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
Max Current	Operating 180mA at 12V, 190mA at 24V ; Standby 145mA at 12V. 150mA at 24V
AlternatorInputRange	35V(L-N) to 277V(L-N) AC (+20%) 50Hz - 60Hz (min 15V AC)
Auxiliary Output:	Solid state 2.4A DC at supply voltage.
Fuel/Start Output:	Solid state 3.4A DC at supply voltage
Generator C.T.	5A secondary 0.5VA
OperatingTemperatureRange:	-30 to +70°C

 
DSE720


The Model DSE720 is an Automatic Mains Failure Control Module.
The module is used to monitor a mains supply and automatically start a standby generator set.
The module also provides indication of operational status and fault conditions, automatically shutting down the genset and indicating failures by means of an LCD display, and appropriate flashing LED on the front panel.
 
Selected timers and alarms can be altered by the customer from the front panel.
Alterations to the system are made using the 810 interface and a PC.

DSE 720
Power Supply	8 to 35 Vdc Continuous
Cranking Dropouts:	Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
Max Current	Operating 180mA at 12V, 190mA at 24V ; Standby 145mA at 12V. 150mA at 24V
Mains Sensing Input Range	35V(L-N) to 277V(L-N) AC (+20%) 50Hz - 60Hz (min 15V AC)
Alternator Input Range	35V(L-N) to 277V(L-N) AC (+20%) 50Hz - 60Hz (min 15V AC)
Auxiliary Output:	Solid state 2.4A DC at supply voltage.
Fuel/Start Output:	Solid state 3.4A DC at supply voltage
Generator C.T.	5A secondary 0.5VA
Operating Temperature Range:	-30 to +70°C

DSE6110


The DSE6110 is an Auto Start Control Module suitable for a wide variety of single gen-set applications.
Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED.
 
Key features
? Back-lit text LCD display
? Front panel editing
? LED and LCD alarm indication
? Power Save mode
? CAN and Magnetic Pick-up/Alt. versions available (specify on ordering)
? PC and front panel configuration
? 6 Digital inputs
? 3 Analogue inputs
? 6 Outputs (4 configurable on Magnetic Pick-up/Alt., 6 configurable on CAN version)
? Configurable timers and alarms
? Alternative configuration
? Event Log (10)
? Remote Start input
? 3 Phase generator monitoring
? Current Monitoring and protection
? Battery voltage monitoring
? Engine pre-heat
? Hours counter
? Comprehensive shutdown or warning on fault condition
Key benefits
? Hours counter provides accurate information for monitoring and maintenance periods
? User-friendly set-up and button layout
? Multiple engine parameters are monitored simultaneously
? Module can be configured to suit individual applications
? Compatible with a wide range of CAN engines
? Uses DSE Configuration Suite PC software for simplified configuration
? IP65 rating (with optional gasket) offers increased resistance to water ingress
? Licence-free PC softwar
 

DSE6120


The Model 6120 is Automatic Engine Control Module, which has been designed to allow the OEM to meet most of the industry's complex specifications. The module is used to automatically start and stop the engine, indicating the operation alstatus and fault conditions, automatically shutting down the engine and indicating the engine failure by means of a graphical LCD display and a flashing LED on the front panel. Selected operation altimers and alarms can be altered by he customer. Adjustments are made by using the integral front panel editor allowing changes in the field, with no specialist equipment required.
 
Feature:
1.Full testing functions, can test all the electricity parameter and non electricity parameter of generator sets
2.Multi start successful conditions (RPM sensor, oil pressure, power)
3.Automatic start/stop, switch on and off (ATS), also have perfect symptom protection functions



DSE7210


DSE7210 diesel generator starting smartgen controller
Description  

KEY FEATURES:
- 4-Line back- lit LCD text display
- Five key menu navigation
- Front panel editing with PIN protection (Front panel programming)
- LED and LCD alarm indication
- Customisable status screens
- Power save mode
- 6 configurable inputs (Configurable inputs and outputs)
- 8 configurable outputs
- Configurable timers and alarms
- 3 configurable maintenance alarms
- Multiple date and time scheduler
- Configurable event log (100)
- Control logic facilities
- Easy access diagnostic page (Strong diagnostic function)
- CAN and Magnetic Pick-up/Alt. sensing
- Fuel usage monitor and low fuel alarms
- Charge alternator failure alarm
 
- Manual speed control (on compatible CAN engines)
- Manual fuel pump control
- Engine exerciser
- Protections disabled" feature
- KW Overload protection
- Power monitoring (kW h, kV Ar, kV A h, kV Ar h)
- Load switching (load shedding
and dummy load outputs)
- True dual mutual standby with load balancing timer
- USB connectivity
- Backed-up real-time clock
- Fully configurable via DSE Configuration Suite PC software
- Configurable display languages
- Remote SCADA monitoring via DSE Configuration Suite PC software
 
KEY BENEFITS
- 132 x 64 pixel ratio display for clarity
- Real-time clock provides accurate event logging
- Multiple date and time scheduler
- Set maintenance periods can be configured to maintain optimum engine performance
- Licence-free PC software
- IP65 rating (with supplied gasket) offers increased resistance to water ingress
                                                                  
 
DSE7220

Operating Voltage	DC8.0V to DC35.0V,Continuous Power Supply.
Power Consumption	<3W(standby:≤2W)
Alternator Input Range	15V - 360 V AC (ph-N)
3-Phase4-Wire	26V - 620 V AC (ph-ph)
3-Phase3-Wire	15V - 360 V AC (ph-N)
Single-phase2-wire	15V - 360 V AC (ph-N)
2-Phase3-Wire:
Alternator Frequency	50/60Hz
Speed Sensor voltage VPP	2.2 - 100Vpp (Peak to peak)
Speed Sensor Frequency	10000Hz (max)
Start Relay Output	16Amp Controller Power Voltage Output
Fuel Relay Output	16Amp Controller Power Voltage Output
Programmable Relay Output 1	7Amp  250VAC Voltage Free Output
Programmable Relay Output 2	7Amp  250VAC Voltage Free Output
Programmable Relay Output 3	16Amp  250VAC Voltage Free Output
Programmable Relay Output 4	16Amp  250VAC Voltage Free Output
Case Dimension	210mm x 152 mm x 48 mm
Panel Cutout	186mm x 141mm
C.T. Secondary	5A Rated
Working Conditions	Temperature: (-25~+70)ºC      Humidity:(20~90)%
Storage Condition	Temperature::(-40~+85)ºC
Protection Level	IP55:When waterproof rubber seal installed between the  controller and panel fascia.
	IP42:When waterproof rubber seal is not installed between the controller and panel fascia.
Insulating Intensity	Object: input/output/power
	Quote standard: IEC688-1992
	Test way: AC1.5kV/1min leakage current:3mA
Weight	0.68kg

 
DSE7310


1.Introduction:
The DSE7310 is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).


DSE7320


1.Introduction:
        DSE7320 is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).
 
2.Technical data:
 
 
 

Power Supply	8 to 35 Vdc Continuous
Cranking Dropouts:	Able to survive 0 V for 50mS, providing supply was at least   10V before dropout and supply recovers to 5V without the   Need for internal batteries.
Max Current	Operating 340 mA at 12 V, 160 mA at 24 V;   Standby 160 mA at 12 V, 80 mA at 24 V 24V
Start Output:	15 A DC at supply voltage
Fuel Output:	15 A DC at supply voltage
Auxiliary Relay Outputs:	2 A DC at supply voltage
Charge Fail / Excitation Range	0 V to 35 V
Alternator Input Range:	15 V - 333 V AC (L-N)
Alternator Input Frequency:	3.5 Hz to 75 Hz
Mains Supply Input Range:	15 V - 333 V AC (L-N)
Mains Supply Input Frequency:	3.5 Hz to 75 Hz
Magnetic Pick-up Voltage Input Range:	+/- 0.5 V to 70 V
Magnetic Input Frequency:	10,000 Hz (max)
Operating Temperature Range:	-30 to +70°C
Panel Cutout:	220mm x 160mm ( 8.7" x 6.3"