Generator Manufacturers and Factories

Home Generator Products CE & ISO Approved Methane Gas Generator

CE & ISO Approved Methane Gas Generator

CE & ISO Approved Methane Gas Generator
Price: US $ 12000-50000unit
Trade Terms: FOB,CFR,CIF
Min Order: 1unit
Pay Type: L/C,T/T

CE & ISO Approved Methane Gas Generator 
 

CAMDA is not only a diesel genset supplier, but a gas genset manufacturer as well. In cooperation with China Cummins, CAMDA has developed its own H series gas generator. Such fuel as biogas, natural gas, LPG, coal bed methane, landfill gas, etc. are applicable to our gas gensets.

 

 Founded in 1998, Camda has been widely accepted and respected nationwide and overseas due to its strict quality management and all around expertise. Since establishment of its first diesel unit production line, it has been working closely with worldwide brands, including Cummins, Perkins, and Doosan. A couple of years later, in cooperation with Cummins China, Camda developed its own gas engines, H series, in the range of 30kW to 250kW. In 2009, Camda was authorized as the distributor for Waukesha gas engines in China, and later in 2012, it became authorized distributor for GE gas engines including Jenbacher and Waukesha. With an annual production capacity of 3000 units, the company is one of the leading generator set manufacturer and supplier in China. 
 

Genset working condition:

A.  Acceptable working conditions
Ambient temperature: -10~+40ºC
(antifreeze or preheater needed for below 0ºC)
Relative humidity: <90%(20
ºC)
Altitude: ≤1000m
B. Normal working conditions
Gas gensets can run at rated power on the conditions: 
Atmospheric Pressure:  100kPa
Ambient Temperature:  20
ºC
Relative Humidity:  30%
C. Applied gas
      Natural Gas, Biogas, LPG, Landfill gas, Oil gas, Syngas, Coal mine gas

Acceptable fuel gas pressure:  5~12kPa
CH4 content: for natural gas ≥ 85%; for biogas ≥ 55%
Gas heat value ≥ 5500kcal/Nm3 (23MJ/Nm3 ). 
(Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.)
Gas doesn't include free water or free materials (the size of impurities should be less than 5μm.)
H2S content ≤ 200mg/Nm3
NH3 content ≤ 20mg/Nm3
Impurities content ≤ 30mg/Nm3;size≤5μm
Water content ≤ 40g/Nm3     


Standard Scope of Supply

1.   Brand new gas engine, 90% parts include engine body , crank shaft, cam  
      shaft, piston, cylinder head, etc made by Cummins with best quality
2.   Brand new brushless French Leroy Somer or UK Stamford alternator
3.   Rating: 3 phases 4 lines. 400/230V, 50 HZ , 1500rpm, 0.8PF, IP22-23, 
      Insulation class H
4.   Radiator for 40/50 Celsius ambient temperature
5.   Ignition system adopted USA ALTRONIC
6.   Emergency stop mounted
7.   Battery,Battery cable and Battery charger
8.   Standard tool box
9.   Standard Accessory for installation (include bellows,silencer,flange,asbestos 
      pad,Anti-rust water,screw )
10. Gas Train include Regulator valve,Electromagnetic Valve, Fire arrestor,Ball 
      Valve (Chinese brand)


Optional

1.   Sound-proof canopy
2.   CHP system
3.   Grid parallel system
4.   Remote radiator
5.   Auto oil filling system
6.   Water heater
7.   Oil heater
8.   Gas leaking detector
9.   Flame detector
10. Gas scrubber

Genset         
Model
Engine Model Alternator 
Model
Prime 
Power  
(KVA)
Prime 
Power  
(KW)
Continuous 
power 
(KVA)
Continuous 
power 
(KW)
KDGH24-G HG4B LSA42.3VS3 30 24 25 20
KDGH30-G HG4B LSA42.3S4 37.5 30 30 24
KDGH50-G HG6B LSA43.2L65 62.5 50 50 40
KDGH80-G HGN14 LSA44.2VS45 100 80 100 80
KDGH120-G HGN14 LSA44.2M95 150 120 125 100
KDGH150-G HGNT14 LSA46.2M5 188 150 188 150
KDGH200-G HGNT14 LSA46.2L6 250 200 200 160
             
Prod Model: H Series
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Warranty: 1 Year or 1500 Hours
Engine: Cummins-Based; Camda-Designed
Alternator: Leroy Somer, Stamford, Marathon
Controller: Deepsea, Comap
Breaker: LG, ABB
Cooling: Radiator or CHP Heat Exchanger
Ignition System: USA Altronic
Qualifications: CE; ISO 14001, 18001, 19001
Color: Standard Red, etc.
Service: Presale Test, Overseas Maintenance
Gas Source: Natural Gas
Camda New Energy Equipment Co., Ltd Established in 1998, Camda began to engage in manufacturing and servicing DIESEL GENERATOR, supplying a wide range of products, such as Cummins, Perkins, Lovol, Daewoo, Deutz, etc. With production reaching 5000 pieces annually, Camda diesel generator includes:

Cummins: Prime power 18kw (22.5kVA) - 1080kw(1350kVA)

Perkins: Prime power 8kw (10kVA) - 1800kw ( 2250kVA)

Daewoo: Prime power 130kw (162kVA) - 600kw (750kVA)

Deutz: Prime power 20kw (25kVA) - 120kw (150kVA)

For GAS GENERATOR, presently Camda can supply natural gas and biogas generator from GE Jenbacher, Wachesha, Daewoo. We are the most important distributor of GE Jenbacher and Wachesha in China. Our own brand gas generator, Camda H series, is developed by us in cooperation with Cummins and has been displayed at Shanghai Expo 2010. Camda gas genset is in service in UK, Russia, Italy, and many other countries, with power ratings:

Camda H series: 24kw (30kVA) - 500kw (625kw)

Daewoo: 100kw (125kVA) - 310 (387.5kVA)

Camda also is an experienced package system supplier engaged in biogas production and power generation. We can take projects from conception to implementation, including design, project management, manufacturing, installation and commissioning. Camda's biogas power plant covers landfill, farm waste, and food waste.

Accomplished around 170 biogas power plants in China.

Investing and operating 2 landfill site (CDM project), fitted up with gas generator with power output of 10 MW.

Built up a demo project processing 10 tons/day of food waste.

Send your message to this manufacturer

  • Camda New Energy Equipment Co., Ltd.

More >

Other Generator Products with This Manufacturers

About Us Generator Products Generator Manufacturers Hot Generator Generator News Generator Trade Shows Site Partners Contact Us Sitemap