CAMDA H Series gas genset characteristic and advantage
CAMDA H Series Gas Engine:
On the base of world famous brand of CUMMINS engine, according to the characteristic of combustion
And control for gas engine inside the cylinder, adopted the gas engine design concept to manufacture. Its important parts of main body from material, processing technology to the processing precision are in strict accordance with the international advanced technology standard. Special design and special processing technology ensure the engine has a good stability and durability.
Chinese local gas engine:
Engine no matter in the whole materials and
Processing technology as well as processing
Precision are better than domestic gas engine.
Application Condition
CAMDA H Series gas genset rated power is on the base of following application condition:
1. Ambient temperature: 0-40° C
2. Altitude: Sea level 500 m below
3. Gas Requirement:
Dust and particle: ≤ 3 μ M
H2S content: ≤ 200 ppm
Gas temperature: 0~45° C
Relative humidity: ≤ 100%
Inlet gas pressure: 5~12kPa
4. Heat value requirement: Biogas≥ 21MJ(5000 kilocalorie)
Natural gas≥ 31MJ(8000 kilocalorie)
Mentioned above is basic requirement, through correction, we can apply to other en
Standard Scope of Supply
1. Brand new Camda Gas engine.
2. Brand new Leroy Somer AC brushless alternator IP23. Rating: 3 phases 4 lines. 400/230V, 50 Hz, 1500rpm, 0.8PF, IP22-23, Insulation class: H.
3. Comap Control Panel.
4. Ignition system, including: ECU, Spark plug, High-voltage electricity wire; Ignition switch, Ignition coil; Wires.
5. Electronic speed regulator, including controller and actuator.
6. Solenoid valve
7. Flame arrester.
8. Hand valve
9. Zero pressure valves
10. Mixer.
11. Air filter.
12. Silencer
13. Remote radiator
14. Air circuit breaker (For the protecting purpose of overload, over current, etc)
15. Rubber anti-vibration pad between engine, alternator, control panel and base frame
16. Standard accessories, anti-vibration pad, exhaust pipe, maintenance tools kit, filters
17. Maintenance Operating manual, Quality certificate, Gen-sets ex-factory test report
Optional:
1. Sound-proof canopy
2. CHP system
3. Grid parallel system
4. Remote radiator
5. Auto oil filling system
6. Water heater
7. Oil heater
8. Gas leaking detector
9. Flame detector
10. Gas scrubber
Contact us
Camda new energy equipment Co., Ltd.
Company address: Tangchun industrial zone, liaobu town, dongguan, guangdong, China (mainland)
Contact: Ms. Tina tel: 86-769-88996312 fax: 86-769-88996200
Camda New Energy Equipment Co., Ltd Established in 1998, Camda began to engage in manufacturing and servicing DIESEL GENERATOR, supplying a wide range of products, such as Cummins, Perkins, Lovol, Daewoo, Deutz, etc. With production reaching 5000 pieces annually, Camda diesel generator includes:
Cummins: Prime power 18kw (22.5kVA) - 1080kw(1350kVA)
Perkins: Prime power 8kw (10kVA) - 1800kw ( 2250kVA)
Daewoo: Prime power 130kw (162kVA) - 600kw (750kVA)
Deutz: Prime power 20kw (25kVA) - 120kw (150kVA)
For GAS GENERATOR, presently Camda can supply natural gas and biogas generator from GE Jenbacher, Wachesha, Daewoo. We are the most important distributor of GE Jenbacher and Wachesha in China. Our own brand gas generator, Camda H series, is developed by us in cooperation with Cummins and has been displayed at Shanghai Expo 2010. Camda gas genset is in service in UK, Russia, Italy, and many other countries, with power ratings:
Camda H series: 24kw (30kVA) - 500kw (625kw)
Daewoo: 100kw (125kVA) - 310 (387.5kVA)
Camda also is an experienced package system supplier engaged in biogas production and power generation. We can take projects from conception to implementation, including design, project management, manufacturing, installation and commissioning. Camda's biogas power plant covers landfill, farm waste, and food waste.
Accomplished around 170 biogas power plants in China.
Investing and operating 2 landfill site (CDM project), fitted up with gas generator with power output of 10 MW.
Built up a demo project processing 10 tons/day of food waste.
