Generator Manufacturers and Factories

Home Generator Products Wind Power Generator System for Grid System (MS-WT-10000)

Wind Power Generator System for Grid System (MS-WT-10000)

Wind Power Generator System for Grid System (MS-WT-10000)
Price: Negotiable/Piece
Trade Terms: FOB,CFR,CIF
Min Order: 1/Piece
Pay Type: L/C,T/T,D/P
New wind power technology of our wind turbine generator.

Start-up at a wind speed of 0.2m/s-0.4m/s and creates power at a wind speed of 1.3m/s-1.8m/s. And the generator without heat.
--- Our turbine is free from an iron core. From a motionless state, its starting torque is three times lower than turbines of different brands.
---Resistance has been reduced to the greatest extend by no cogging effect.
---The turbine's structure is disk.
---The turbines adopts open design with no front/rear end cap, therefore does not produce heat at all. It is ensuring insulating reliability of the coils.

Typhoon resistance
---Multiple-electronic, mechanical braking
---Self-developed national patented technology without any braking devices

Lower noise
---We break the blade element theory principle which has been observed in blade design. The span-wise section and the appearance of the blade has the best aerodynamic performance.
---The apex of the blade is designed to reduce noise. When the vane is rotating at top speed, the noise tested 10 meters away from the blade is only 30db, which is even lower than domestic use electric fans.

Anti-corrosion, sand storm and anti-strike
---The blade uses aviation duralumin molded by high pressure with a specially treated surface which will never rust in various severe environments.
---The blade has a strong hard surface which is 150HB hardness.

Without stalling and the blade is thin & light
---The rotation speed of the blade is faster and it can reach 2200 cycles/minute without stalling.
---Our blade for 600W is only 3mm, the other brand's blade for thickness is 20mm which is 6 times thicker than our blade. And the weight is only 500g, the other brand's blade is 830g which is 40% heavier than our blade.

Anti-thunder and lighting
---The whole body of our wind turbines is designed for metal conduction with a reliable protective performance against lighting.
Rated Output 10000W
Peak Output 14000W
Rated Voltage(V) 500V
Start-up Speed(m/s) 0.2-0.4
Cut-in Speed(m/s) 1.8
Rated Wind Speed(m/s) 10
Working Wind Speed(m/s) 1.8-25
Survival Max.Wind(m/s) 60
Over-speed Control mechanical governor and electromagnetic braking
Rated Rotor Speed(RPM) 220
Rated Charging Current(A) 22.7
Noise  <20db(5m behind turbine@5m/s wind speed)
Working Temp.Range -30--50
No.of Blades 4
Blades Material polymer materials
Rotor Diameter(m) 7.85
Generator Material 45#steel
Generator Type free from slot effect,iron core and reluctance
Net Weight(KGS) 210
Productor life 20
Warranty(years) 5
Prod Model: MS-WT-10000
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Net Weight: 210kgs
Blade Material: Polymer
Peak Output: 16000W
Annual Energy Output: 5 Times Higher
Rotating Shaft: Horizontal
Number Of Blade: 4
Stress Way Of Blade: Lift and Drag
The company has been devoted to the development and application of modern technology in such energy domains as:

1. 40% savings in fuel
2. Complete solutions to oceanic and island Wind Power generation.
A breakthrough by engaging the useage of 70% of land surface for wind power; therefore securing sufficient fuel supply for bio-energy projects.
3. In compliance with the sectoral principals of high marketability and socialisation, the company has established a highly efficient operational mode, integrating with technology capital and production force.
4. It has focused on building up a high-end new type of sectoral platform that will penetrate the global market. This will create a high industrial concentration from the start of an original technical creation to the application at the end, thus achieving an unprecedented efficiency.

The sector developed by the company contains an urgent multi-billion dollar worth of market demand

The company will play an important role in achieving related national strategy in the sustainability of environmental production and industrial transfer; as well as the application of new energy resources.

The company will enhance and introduce fast reforms in general industries, agricultural, service industries and civil use.

Great breakthroughs have been realised by the company in the areas of wind power generation such as

1. start-up and power generation from a small breeze
2. high resistance to strong wind
3. anti-erosion
4. no sound
5. light body components

All of the above innovations are cutting edge in the world market, providing premises for broad application of wind power generation, for instance:

1. Island and remote regions where electricity supply remains a problem.
2. Wind power generation is applicable in areas where there is a daily wind force of 3 to 5 degrees.
3. Low noise wind power generation can be implemented in residential areas.
4. Electricity cost will be minimized by a great degree in hotels, tourist spots and other business premises.
5. Under the state `s distributed power generation policy, the company offers a low risk and high return investment opportunity.
6. Our products provide highly efficient and smooth process to achieve the policy target of energy saving enviroment protection.

The R & D, manufacturing, marketing, and service of wind power projects are undertaken and implemented by Microsea New Energy Investment Company., Ltd, which has a high level research and manufacturing force under a good management team. It has possesed four technology patents.

Send your message to this manufacturer

  • Microsea (Guangzhou) New Energy Technology Co., Ltd.

More >

Other Generator Products with This Manufacturers

About Us Generator Products Generator Manufacturers Hot Generator Generator News Generator Trade Shows Site Partners Contact Us Sitemap