Wall-Mounted Daying Machine

Wall-mounted drying machine belongs to the wall with no heat regenerative adsorption dryer. It is widely applied to the pharmaceutical industry, food processing, brewing, light industry, production lines, breathing air systems, optical system, the chip production, cutting machine tools, papermaking industry, communications technology, robot technology, pneumatic control, automatic control technology, automatic technology, spray, spray paint room, a data medium, lab, microbiological experiment, sea level operation in areas such as compressed air drying operation.
The device is an advanced, the use of pressure swing adsorption principle, by filling with high water absorbability of alumina or molecular sieve, the compressed air drying of a device, usually can make the compressed air drying and the dew point - 40 to 70 degrees Celsius.

Wall-mounted drying machine is designed on the basis of the principle of pressure swing adsorption, that is to say, the stress state under water saturated adsorption of the adsorbent quickly step down to atmospheric pressure, at this point, the adsorbed water stripping by oneself, to realize the regeneration of the adsorbent, stripping out the moisture spread to the outside.

The method of using the principle of regeneration is called pressure drop method, due to the use of the heat generated by the adsorbent in adsorption process, access to and use a small part of the dry air to regeneration of adsorbent, the adsorbent regeneration, so the pressure drop method is also called thermal regeneration.

Wall-mounted drying machine is using the twin towers, no hot regeneration of pressure swing adsorption (psa) technology, its working principle is an adsorption tower adsorption drying under the pressure of work, and another part use their dry gas adsorption tower and step-down is close to atmospheric pressure, as regeneration gas for regeneration, with a fixed switch time to switch from the twin towers, so as to continuously provide dry gas.

1. The design characteristics of
@The optimization design of the diaphragm pilot valve
@A shuttle valve body assembly
@Quick replacement of adsorbent, reduce downtime
@Anodic oxidation of aluminum alloy, aluminum alloy casting fully embalmed
@Remove the board can be whole, make maintenance easier
@Built-in muffler to reduce noise
@Spring compression adsorbent to avoid friction
@Transparent tube makes adsorbent adsorption state clearly visible
@Simple plug type exchange, without having to remove the unit
@Multiple inlet design. Can adjust the inlet position
@Adsorption tower pressure, according to avoid the air pressure is too small to cause abnormal body movements.
@Built-in radiator can decrease the temperature of compressed air. (optional)

2. Intelligent controller
This software to connect other diagnostic tools at the same time, allows it to analyze and in need of changing the variable operating parameters to ensure that the condition of dry mechanic do need.
1. The switching time of the drying tower pressure time setting;
2. Drain valve, drain valve of the initial condition set for the factory, can according to need to change the set up by using software.
3. Alarm set: The user can change the parameters of the remote alarm Settings;
4. Maintenance information: Display the default Settings, maintenance history, accumulative total running time. And since the last maintenance to design;
5. Series code: Each controller and software can be confirmed as the only coding;
6. Information. If there are any errors, time and errors will be on display in the window of the software;
7. Energy management: In order to save the consumption of compressed air, energy management tools can also from this window to activate;
8. Show that the control panel LED lights display and the dew point on the LCD screen display. Can view the blot machine running status.