RO system(pure water treatment)
1. Pure water treatment
2. One-stage reverse osmosis
3. Two-stage osmosis purifying water
4. Ultra Filtration Mineral Water
One-stage osmosis purifying water equipment
One-stage reverse osmosis
Original water(tap water, surface water, underground water) pass pretreatment, sophisticated filter, and then sent to reverse osmosis by high pressure pump to produce pure water directly that is known as one-stage reverse osmosis.
One-stage reverse osmosis is suitable for the original water with conductivity less than 500 us/cm and conductivity of output water is 1-10 us/cm.
Two-stage osmosis purifying water equipment
The original water(tap water, surface water, underground water) is sent to pretreatment system by adding pressure to be filtered roughly, then to be filtered by sophisticated filter, after that the water is transmitted to primary reverse osmosis by one-stage high pressure pump to be filtered, then the water is added pressure again by secondary high pressure pump and sent to second reverse osmosis system to produce the product water, that is called two-stage reverse osmosis.
Original water conductivity>500us/cm, purified water conductivity: 1-10us/cm
Ultra Filtration Mineral Water Equipment
Ultrafiltration
Normally the ultrafiltration is used to produce mineral water and spring water. Driven by pressure, it is a process of discharging impurity through different diameter hole on the ultrafiltration membrane. At present, the hollow-fiber type of polysulfones are widely used in water treatment industry.
|
Model |
Parameter |
Operation pressure |
recovery |
dimensions |
|
|
Gal/day |
Ton/h |
Mpa |
% |
L |
W |
H |
|
RO1T-2 |
6000 |
1 |
1: 1 |
50-60 |
2.6 |
0.9 |
1.5 |
|
RO2T-2 |
12000 |
2 |
1: 1 |
60-70 |
2.6 |
0.9 |
1.8 |
|
RO4T-2 |
24000 |
4 |
1: 1 |
60-70 |
2.6 |
0.9 |
2.2
|
Zhangjiagang City WanJin Machinery Co., Ltd. (Former Zhangjiagang City Sanxing Complete Beverage Machinery Factory) was founded in 1998, specializes in manufacturing complete sets of beverage filling machinery. We have excelled in research, production sales and technical services, with a guiding principle of 'meeting customer needs and satisfaction through continuous innovation and pursuit'. For over 10 years of development, with good quality products and services...
.
We devote ourselves to the development, research and production of plastic machine and liquid food and beverage packing and filling industry and automatic blow molding machine in China.
For beverage machine, our Main products including:
The capacity of 2000-- 20000 BPH for hot filling, MID-temp filling, aseptic cold filling lines.
The capacity of 2000-- 20000 BPH for mineral water and purified water producing line.
The capacity of 2000 -- 2000 BPH for carbonated beverage producing line.
The capacity of 100 -- 2000 TBH, for 3 gallon, 5 gallon.
The capacity of 8000 BPH for the volume of 200ml to 500ml in milk packaging.
All kinds of water treatment equipment.
PET perform inject and blowing-stretching machine. Mould plastics machine
Turn-key projects
Flat and tube UHT device, and CIP system.
All the products are sold well in every province and city of the whole country and also exported to about thirty countries and areas with strong technical force, advanced equipment, scientific management system and perfect after-sales service.
Welcome to visit our company. Thank you!
