Function:
1.can promote the blood circulation and the metabolism;
2.can resolve the fat and expel the toxin, increase immunity function.
3.can stimulate the cell of brain, reduce the pressure, remit the fatigue, improve the quality of sleeping.
4.can resume the physical force, perk inspirit, enhance the attention.
How to use
Airflow speed selection
* The airflow speed can be switched between two levels.
(The airflow volume is constant regardless of the airflow speed selection.)
* Hold the mouthpiece as shown in the figure and select the airflow speed.
(Do not block the air outlet port.)
CAUTION
When storing the appliance for a long time.
Before storing, operate the appliance for 30 minutes on a dry day to dry the tube and capsule completely.
How to maintain
CAUTION
Before starting the maintenance, press the off button and disconnect the power plug.
Frequent maintenance
* Empty the capsule if water is accumulated in it. Wipe off droplets with a facial tissue or something similar.
If too much water accumulates in the capsule, water may adhere to the filter in the O2 mouthpiece, or water droplets may come out of the O2 mouthpiece.
If water adheres to the filter, remove the filter and dry it in the shade in a clean place.
Before use, dry the filter completely. Absorbing water with tissue paper helps to dry the filter.
(Refer to page 14,15,16 for removal procedures for the filters.)
If you use the Oxygen Concentrator continuously or at a time or place of high humidity, water will accumulate more quickly.
NOTE* Please do not drink the water which accumulated.
How to maintain
Periodic maintenance (approximately once per month)
* You may remove the filer and wash it with water.
After washing it, dry the filter completely before attaching it to the main unit.
NOTE
* After the maintenance, be sure to attach the filter before use.
Daily maintenance
CAUTION
Maintenance required when odor and dirt become annoying or after a long period of disuse.
Maintenance on O2 headset and tube set
1. Remove the capsule and tube. (Leave the capsule and tube mounted except when performing maintenance.)
2. Remove the mouthpiece, filter, and the mouthpiece cap.
Removing the O2 mouthpiece Pull out the mouthpiece slowly the direction shown by the arrow.
Daily maintenance
3. Rinse the components.* Soak the components in water for 2 to 3 minutes and let water go through the tube.
NOTE
1) Do not soak the components in water that is hotter than 60.(Otherwise, it may cause deformation or discoloring.)
2) Do not rinse the whole O2 headset.
3) Do not use detergent, benzene, thinner, or alcohol.(Otherwise, it may cause cracks or discoloring.)
4) Be careful not to lose the filter, which are very small.
4. Dry the components.
1) Wipe out and drain off the moisture.
2) Mount the components on the unit as shown in the figure on the right and operate for 30 minutes to dry out the unit.
3) Remove the O2 headset, capsule and tube and dry them completely in a clean place in direct sunlight. (If drying is incomplete, water may drip out of the O2 mouthpiece during operation.)
NOTE Do not the components with the air of an electric dryer, etc. (It may cause deformation or failure.)
5. Reassemble the components.
Shanghai Trend International Trade Co., Ltd. Is specialized in manufacturing health care products. Include slimming belt, massage cushion, massage pillow, massage chair, massage sofa, neck massage, foot massager, exercise bike, stepper, sit-up bench and so on.
Insisting on providing customers with the best products, we have implemented standardized production systems, which are conducted in accordance with international standards. "Meeting the needs of our clients" is the managing principle of our company.
We have offices in Shanghai, Guangzhou, Wenzhou and Yiwu, all the four cities now appear to be the most active economic development places in China. For this reason, we can keep track of the market trends and remain a leader in the intense competition. We have a strong R&D capability, apart from only exporting existing series, our designers can also develop new collections based on clients' specific requirements. Currently our products are being distributed in the Western European, North and South American, South-east Asia and African markets, being well received in each area.
We look forward to get your kind inquiries and we are ready for all sorts of cooperation with customers both from domestic and overseas. We are sure both the price and quality will satisfy you. We wish to be your best partner in a quick developing China.
