N08800 Nickel Alloy Coil with 2b Ba Surface

Quick Details


Place of Origin: Jiangsu, China (Mainland)
Type: Nickel Strip
Application: Chemical processing Pollution control Pulp and paper production Indus
Grade: Nickel Alloy N08800
Ni (Min): up to standard
Resistance (μΩ.m): up to standard
Powder Or Not: Not Powder
Ultimate Strength (≥ MPa): up to standard
Elongation (≥ %): up to standard
Model Number: Nickel Alloy
Brand Name: FLS, FLS
size: as your requirment
nate: we also provide other meterials
surface: 2B,2E


Packaging & Delivery

Packaging Details:	standard seaworthy export packing or based on customer's requirement
Delivery Detail:	7-15 days after received your deposit.

 
Nickel Alloy N08800
Introduction
INCOLOY alloys belong to the category of super austenitic stainless steels. These alloys have nickel-chromium-iron as the base metals, with additives such as molybdenum, copper, nitrogen and silicon. These alloys are known for their excellent strength at elevated temperatures and good corrosion resistance in a variety of corrosive environments.
INCOLOY alloy 800 is an alloy of nickel, iron and chromium. The alloy is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures. Other characteristics of the alloy are good strength, and high resistance to oxidizing, reducing and aqueous environments. The standard forms in which this alloy is available are round, flats, forging stock, tube, plate, sheet, wire and strip.


Chemical Composition

The chemical composition of INCOLOY alloy 800 is given in the following table.

Element	Content (%)
Iron, Fe	≥39.5
Nickel, Ni	30-35
Chromium, Cr	19-23
Manganese, Mn	≤1.5
Others	Remainder

Physical Properties
The following table discusses the physical properties of INCOLOY alloy 800.

Properties	Metric	Imperial
Density	7.94 gm/cm3	0.287 lb/in3

 Mechanical Properties
The mechanical properties of INCOLOY alloy 800 are tabulated below.

Properties	Metric	Imperial
Tensile strength(annealed)	600 MPa	87 ksi
Yield strength(annealed)	275 MPa	39.9 ksi
Elongation at Break	45%	45%

Other Designations
Some of the designations used to denote INCOLOY alloy 800 are listed below:

UNS N08800	AMS 5766	AMS 5871	ASTM B163	ASTM B366
ASTM B407	ASTM B408	ASTM B409	ASTM B514	ASTM B515
ASTM B564	DIN 1.4876

Fabrication

Machinability
Machining characteristics of this INCOLOY alloy 800 are similar to that of iron-based alloys. This alloy tends to work-harden during machining.

Welding
INCOLOY alloy 800 can be welded by common welding techniques, using a matching filler metal.

Forming
This alloy exhibits good ductility and hence can be formed using conventional methods.

Hot working
INCOLOY alloy 800 can be hot worked at temperature ranges of 871-1232°C (1600-2250°F).

Cold Working
Cold working may be done on the alloy using standard tooling.

Annealing
INCOLOY alloy 800 may be annealed after cold working. Annealing should be done at 982°C (1800°F) for 15 min and then the alloy should be air cooled.

Applications
INCOLOY alloy 800 is used in the following applications:

Heat exchangers
Carburising equipment

Heating elements
Sheathing and nuclear steam generator tubing.

Stock

Form	Specification	Supply Form	Others
Sheet	Thickness:0.40-4.75mm,General Width:1000,1219,1500mm	Whole Coil or piece of it	Cold Annealed,Surface 2B,2E
Plate	Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled)	Whole Coil or piece of it	Single hot rolling,Solid solution annealed state,Surface 1D
Belt	Thickness:0.10-3.0mm,Width:50-500mm	Whole Coil or Specified size	Cold Annealed,Surface 2B,2E
Bar & Rod	Rolled barΦ5-45mm,Length≤1500mm	Polished Bar(circle,Square)	Solution annealing,descaling
	Forged barΦ26-245mm,Length≤4000mm
Weld tube	Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm	Base on your requirement	Use for PHE
Seamless Tube	Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm	Base on your requirement	Use for PHE
Wire	Outer diameterΦ0.1-13mm	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy
Forged piece	roundness and square alloy	Base on your requirement	Steel, Alloy
Flangs	All kinds of Flangs	Base on your requirement	Steel, Alloy
Welding Material	Coil wire Φ0.90mm/1.2mm/1.6mm	Base on your requirement	Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.
	Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm
	Welding rodΦ2.4mm/3.2mm/4.0mm
Tube	Elbow, three links, four links, different diameter size	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy
Explosive bonded laminate	Raw Sheet Thickness≥2mm	Base on your requirement	Ni & Ni alloy, Ti & Ti alloy