A charge controller's main job is to optimize a PV array's output which can fluctuate based on shading and temperature variables found on the average roof.
Must™ PC1600 Charge Controllers truly represent innovation in Maximum Power Point Tracking (MPPT) technology, which enables them to increase the yield from a solar photovoltaic (PV) array as much as 30% over conventional designs. PC1600 Charge Controllers support a wide variety of system designs, battery chemistries, and integrate seamlessly in terms of system data management and programming.
The innovative PC1600 MPPT software algorithm is both continuous and active, increasing photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both PC1600 Charge Controllers can operate at their full maximum current rating, 40 amps or 60 amps respectively, in ambient temperatures as high as 113° F (45° C).
PC1600 Charge Controllers incorporate the features developed by Must™ , including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built in, backlit 70-character display shows the current status and set the key parameter at the touch of a button.
Saving money when the sun shines, saving much more when it's not
PV system designers met the challenge of delivering both grid-tied savings during normal times and off-grid independence during emergencies with 1-phase arrays of Must IPV3000W/IPV5000W inverter/chargers powering your house. This system saved money on utility bills, supply essential power during emergencies (all with one versatile system).
|
Model |
PC16-4015F |
PC16-5015F |
PC16-6015F |
|
Charge Input |
|
Maximum Open Circuit Voltage of Solar Module |
70V ~145V |
|
Storage Battery |
|
Nominal Voltage |
24V / 48V |
|
Float Voltage |
27.4V / 54.8V |
|
Over Charge Voltage |
28.6V / 57.2V |
|
Lack of Voltage |
21.0V / 42.0V |
|
DC Output |
|
Output Voltage |
22.0-28.6V / 44V-57.2V |
|
Maximum Output Current |
40A |
50A |
60A |
|
Prompt for cutting voltage |
23.0V / 46.0V |
|
Cutting for lack of voltage |
21.6V / 43.0V |
|
LV resumption |
26.0V / 46.0V |
|
Display |
|
LED indication |
Systematic operation, LV indication, LV protection, over charge protection, loads protection, short circuit protection |
|
LCD display |
Charge voltage, charge current, voltage of storage battery, capacity of storage battery, output current |
|
Alarm Protections |
|
Output short circuit protection |
Yes |
|
LV protection for storage battery |
Yes |
|
Other Items |
|
Defend rank |
In compliance with regulations of DIN EN60529 and standards of IP22 or IP65 |
|
Charge mode |
PWM ,constant current_constant voltage, function of automatic protection for storage battery |
|
Radiating mode |
Fan cooling |
|
Working mode |
General controller |
|
Efficiency |
≥97% |
|
Self electricity consumption |
< 10 mA |
< 15mA |
|
Environment |
|
Environmental temperature |
-10 degree--45 degree |
|
Ambient humidity |
0--90%,No dew |
|
Altitude |
≤4500m |
|
Volume |
|
Length*Width*Height |
|
Shenzhen Must Power Limited established in 2010, with the headquarter in Hongkong, which is a professional hi-tech enterprise specialized in UPS, Power Inverter, Solar Power, VRLA Battery development, manufacturing, sales and after-service.
Our comprehensive product lines include:
Off-line UPS, line interactive UPS, On-line UPS, Solar inverter, Power inverters, Stabilizers and Solar battery.
Most of products from MUST applied with CE, FCC certificates. The main markets are Ukraine, Russia, Vietnam, Thailand, Pakistan, India, etc. Must Power Limited is one of the authorized suppliers for China Citic Bank, Ministry of Information Industry of China, Ministry of Power Industry of China, Ministry of Transportations of China.
With an excellent R & D team formed by over 30 engineers and a skilled, dedicated workforce, together 10, 000 square meter in-house manufacturing facilities in Guangdong China, Shenzhen Must Power Limited has innovated, developed and improved the products to meet the demands of customers and keep pace with changing demands of the industries. With 'close to customer' notion, we have aligned most of its resources to support our Original Equipment Manufacturer (OEM) customers, and work with our customers as power partners. Our mission is to be the best supplier of power solutions, and to accomplish this, we will continue to tailor products for market needs while maintaining high quality, integrated customer service and prompt delivery.
