High Quality and Full Power Wind Generator 10kw

MAX/XG-  10KW  wind turbine

Model	MAX/XG-10KW
Rated Output Power	10KW
Rotor Diameter	7.2m
Rated Rotation Speed	180r/min
Rated Wind Speed	10m/s(25.2km/h)
Start Wind Speed	3m/s(7.2km/h)
Security Wind Speed	50m/s(180km/h)
Max Start Torsion Moment n/m	Less 0.2n/m
Output Voltage	upon your requirement
Generator Style	AC 3-phase PM
Top Quality Except Tower	650kg
Service Life	>15 years
Class of Insulation	B
Material of Enclosure	Fine cast steel
Material of Magnet Steel	N38SH neodymium-iron-boron 38sh
Material of Stator	QZY-2/180/470
Corrosion Prevention	Zinc coated / painting(Standard)
Blade Number & Material	3 FRP blades

1. PRO magnetic circuit design, lowest cut-in wind speed≤2 m/s --3m/s;

2. Fine & quality cast steel housing design, ensures the generator's safe operation under severe environment like alpine, high humidity, high temperature, high-class wind area;

3. Use quality brand bearings, magnetic steel material, well heat dissipation, low demagnetization rate;

4. Rotator uses closed transmission slip ring, no wrapped cables;

5. Quality glass fiber reinforced plastic blades, higher than 42% wind power utilization ratio;

6. PRO wind turbine design software GH-BLADED, rational structure, outstanding performance;

7. Special rotating shaft tail design can achieve omniseal by equipping with mature standard bearing and using waterproof seal ring between every connection unit to stop from dusts, water, salt fog etc.;

8. System over-charge/over-discharge protections, DC constant-voltage charge; easy operation, no need for manual duty or particular maintenance;

9. Applied range, from base station to independent power supply system, from wind-solar hybrid street light to small wind farm etc.




Packaging

Plywood case or according to your need



Installation case
MAX/XG wind generators have been installed in France Italy,Germany,and America etc. Both off grid system and on grid system.All win good feedbacks .

The market:
North America, South America, Europe, Africa, Mid , Eastern Asia, ect .




Application

Applications
The hybrid system using wind turbine and Solar PV modules can supply un-interruptible power supply to any applications. The typical applications include the electricity supply to the following applications.
Typical Application	Typical Configuration Off-grid (Stand alone)
Houses, Bunglows, Resorts, Farm houses	systems where grid supply is not available
Village Electrification	Back-up systems to support during grid supply failure
Water Pumping	Grid feed-in systems
Commercial Buildings, Offices, Shops
Remote area Electrification
Schools, Hospitals, Hotels
Telecom towers
Industries, and many more

Certifications


CE ISO NATIONAL PATENT