Supply: 12 or 24 VDC Battery System (Transient and Reverse Voltage)
Polarity: Negative Ground (Case Isolated)
Power Consumption: 50 ma continuous plus actuator current
Actuator Current Range @77° F (25 ° C) - (Inductive Load): Min. 2.5 Amps; Max. 10Amps continuous
Speed Sensor Signal: 0.5-120 Volts RMS
Speed switch Relay contacts(N. O. And N. C): 10 Amps
Performance Isochronous Operation/Steady State Stability: ± 0.25% or better
Speed Range/Governor: 1K to 7.5K Hz continuous
Speed Drift with Temperature: ± 1% Max
Idle Adjust CW: 60% of set speed
Idle Adjust CCW: Less than 1200 Hz.
Droop Range: 1-5% regulation
Droop Adj. Max. (K-L Jumpered): 400 Hz., ± 75Hz. Per 1.0A change
Droop Adj. Min. (K-L Jumpered): 15Hz., ± 6Hz. Per 1.0A change
Speed Trim Range: ± 200 Hz
Remote Variable Speed Range: 500 - 7.5 Hz. Or any part there of Terminal Sensitivity
Terminal Sensitivity J: 100 Hz., ± 15Hz / Volt @ 5.0 K Impedance
Terminal Sensitivity L: 735 Hz., ± 60 Hz / Volt @ 65 K Impedance
Terminal Sensitivity N: 148 Hz., ± 10 Hz / Volt @ 1 Meg. Impedance
Terminal Sensitivity P: 10 VDC Supply @ 20 ma Max
Speed witch adjustment range: 1000-10000HZ
EnvironmentalAmbient Operating Temperature Range: -40 to +180° F(-40° +85 ° C)
Relative Humidity: Up to 95%
All Surface Finishes: Fungus Proof and Corrosion Resitant
ReliabilityVibration: 1G @ 20 to 100 Hz.
Testing: 100% Functionally Tested
Physical Dimensions: See outline (FIGURE 1)
Weigh1: 1.8 lbs. (820 grams)
Mounting: Any position, Vertical Preferred
Dongguan Feirui Electronics Co., Ltd. is located in Donguan City, which is known as "the World's Factory" in China. We are engaged in developing and producing engine parts including starting controllers, speed control units, automatic voltage regulators (AVR), synchronizers, load share modules, and other correlative generator accessories, such as chargers, sensors, actuators and other related products.
We have emulational system which is the most advanced in the same industry. The system can imitate the whole process of real generator. Therefore, we can control our quality with the precise testing equipment. On the other hand, we own some generator experts with rich experience in electromechanical automatic control system. Being good at soft ware & hard ware, these experts are trained by some well-known diesel engine factories. With about 10 years' experience and skill, we can supply the best technology support service. According to customers' requirements, we can develop some special products and supply OEM service.
Due to our unremitting efforts for many years, we have set up wholesalers in Nigeria, Egypt, Thailand and Philippines. Following the ideal of "Quality First, Credit and Service is Our Belief ", we strive for innovation to make satisfied generator parts. We expect to create more achievement tomorrow and welcome you to contact us for cooperation.
