Combined Cycle Power Plant Ccpp

Runh Power is an EPC contractor and complete equipment supplier, which has performed more than 20 international power projects in Turkey, Ukraine, India, etc. With 18 years' development, now we provide EPC/turnkey service and complete set of equipment such as STG, BTG, BOP, etc for all kinds of power projects such as coal fired power plant, biomass power plant, CCPP, waste heat power plant, new energy power plant, etc.？ 1. High efficiency: The efficiency can be up to 60%. 2. Environmental compatibility: Modern combustion engineering also means that the emission of exhaust gases can be controlled and minimized. Compared with all other conventional thermal plants, such as coal-fired power plants, carbon dioxide and nitric oxide emissions are very low when plants are fired with natural gas. 3. Low installation cost Combined cycle equipment is pre-engineered and factory-packaged to minimize installation time and cost. 4. Fuel Flexibility Combined-cycle plants operate efficiently by burning a wide range of fuels ,ranging from clean natural gas and distillate oil fuels to ash bearing crude oil and residual oil fuels. Operation with coal-derived gas fuels has been applied in many commercial-size combined-cycle systems. 5. Rapid start-up Its operational flexibility allows rapid start-up, minimal shut-down times and fast and efficient adjustment to varying load demands 6. Short construction period The very powerful gas tur bine allows for a compact power plant, which minimizes the construction time to around just two-and-a-half years. 7. Less staff and space requirement Gas-fired combined-cycle power plants are often built on a modular basis, being composed of several different units. Each unit is practically a self-contained power plant that can be operated indepemdently of the others, which requires comparatively fewer staff.