i. Main Technical Process
1.Preparation of Biomass
Biomass should be cut to 40mm or smaller than 40mm. The humidity of biomass should be treated to 15% or smaller than 15%. After that,Satisfied biomass is sent into biomass storage room. And at least , it is necessary to store adequate biomass which is enough to support plant to run fro one week.
2 Biomass Gasification Process
B.iomass is fed continuously into gasifier by feeder located on the bottom of gasifier. Under the effect of hot bed material,biomass contact with air from the bottom of gasifier . At the same time ,pyrolysis and gasification reaction happen so that biomass is converted into fuel gas .The main composition of fuel gas is CO,H2,CH4 etc. And some tar and dust are included in fuel gas . The heat value of fuel gas is 1000~1200kcal/Nm3.
3 .Gas Purification Process
Use advanced Purification technology to remove dust and collect tar. At the same time, water from purification system can be recycled . Consequently , biomass gasification plant will discharge zero pollution.
4 .Power Generation Process
Pipe fuel gas into internal combustion engine biomass generator to produce electricity. Voltage :400v.frequency : 50hz etc
Weifang Naipute Gas Genset Co., Ltd. is a professional manufacturer of gas engines and gas generator sets in China.
With powerful support from our R&D center, the power range of our generating sets has been expanded from 10kW to 500kW per unit.
They will be widely used with natural gas, biogas/methane gas, biomass gas(wood gas, producer gas etc. ) petro-gas, LPG, coal bed gas, landfill gas etc.
With new assemble line, NQ, ND, NW series gas engine have been in mass production and are widely used in our gas genset which can be used as both the prime power & standby power. Besides Chinese brand alternator, they can be coupled by world famous brand alternators: STAMFORD, MARATHON, LEROY SOMER, Siemens, etc.
Our generator can be widely use in wastewater treat plant, oil field, farm, landfill and so on.
ADVANTAGE:
-CE and ISO certificate
-Germany technique controller
-Greater load bearing capacity
- Worldwide famous control system
- AVR alternator provides stable voltage and current
- Low noise level, high electrical efficiency and effective performance
- Functionally tested at factory before delivery with professional test equipment
- More orderly appearance and compact
- Good economy, long life unit
- 1 year or 1500 running hours warranty with free spare parts; Two years extended warranties are also available
- Perfect after-sale service
