Generator Manufacturers and Factories

Home Generator Products 40g Ozone Generator Spare Parts with Ceramic Ozone Tube for Water and Air Treatment

40g Ozone Generator Spare Parts with Ceramic Ozone Tube for Water and Air Treatment

40g Ozone Generator Spare Parts with Ceramic Ozone Tube for Water and Air Treatment
Price: US $ 350/Piece
Trade Terms: FOB,CFR,CIF
Min Order: 1/Set
Pay Type: T/T,Paypal,Western Union
40g Ceramic Tube Ozone Generator KHT-40GWO for Air and Water Treatment is a very good unit for big ozone machines or fields below. Open type transfomer. Adjustable ozone output.

One set includes one ozone tube and one transformer.

                                                                                         Model
Item
KHT-40GWOA1
KHT-40GWOA2
VoltageA1: AC110V~130V 50/60Hz   A2: AC220V~240V 50/60Hz
Oxygen flow1L/Min3L/Min5L/Min8L/Min10L/Min
Ozone concentration based on oxygen feeding122Mg/L102Mg/L90.2Mg/L80.1Mg/L66.8Mg/L
Ozone output based on oxygen feeding7.3G/H18.4G/H27.6G/H38.4G/H40.1G/H
Power440W
Output high voltage3.8-4.2KV 6KHz
Cooling methodAir cooling for external electrode and water cooling for internal electrod
Cooling water10L/Min
Ozone output adjustable range20%~100%
TransformerCurrent surge proof soft start performance, Acousto optic warning, Short circuit protection, Open ciruit protection, Overcurrent protection, Overvoltage protection, Overheat protection, Anti-interference circuit, Dampproof, corrosion proof
Working conditions1. Using the ultraviolet absorption method  to test the ozone output and concentration.
2. Oxygen purity: >95%, Dew point: >-45ºC.
3. Ambient temperature: ≤10ºC, Humidity: <10% (Different temperature and humidity in the environment will affect the ozone output and concentration.)
Features:
1. Narrow discharge gap, high ozone output and concentration, low noise.
 
2. High-voltage and high-frequency corona discharge, small size transformer, low consumption rate of electricity.
 
3. The ceramic tubes are with low working voltage but high dielectric constant, not easy to be breakdown.
 
4. Dielectric materials are made by imported high purity aluminum oxide that are sintered through high temperature, two times high-precision internal and external burnish, thus discharge uniformity. Besides, 316L stainless steel internal electrodes and tightness firmwares make its performance better. The end caps of ozone tube and ozone outlets are made of polytetrafluoroethylene, high-purity corrosion resistant fluorine rubber seal rings, with aluminum alloy external radiator, an very effective way to heat radiation. 
 
5. Ozone decrease is lower than 5% if work for a long time, while life time is more than 20,000 hours. 
 
6. Easy to maintain and install.



Prod Model: KHT-40GWO
Input Voltage: AC220V / 110V
Power: 440W
Application: for Air or Water Treatment
Cooling Method: Water Cooled
Gas Feeding: Air or Oxygen
Discharge Material: Ceramic
Ozone Generating Way: Corona Discharge
Warranty: 1 Year
Certificates: CE, RoHS
Ozone Output: Adjustable
DGOzone Ltd. Is one professional company for ozone generators and their parts such as ozone resistant venturi injectors and check valves and so on.

Now DGOzone has been one of the biggest exporter for ozone generators and accessories in China. Besides, DGOzone is also one of the biggest donator in national ozone fields to China Pavilion in Expo 2010 Shanghai.

Send your message to this manufacturer

  • Shanghai Dgozone Ltd

More >

Other Generator Products with This Manufacturers

About Us Generator Products Generator Manufacturers Hot Generator Generator News Generator Trade Shows Site Partners Contact Us Sitemap