3kw Solar Charge Controller With DC Output (SCC3000)

GPRS communication module

Is a terminal device using the GPRS wireless data transmission. Which supports for PPP, TCP, UDP, ICMP and other complex network protocols and SOCKET standards, providing completely transparent data transmission and users free control transmission. This module supports point-to-point, point-to-multipoint, equipment-to-equipment, equipment-to-center etc different communications modes. Users do not need to worry about complex network protocol, they can have the wireless data transceiver with RS232/485/422 interfaces, So that the device can be access to Internet anytime and anywhere.

RS485-USB converter

Universal USB/RS-485 converter, Without external power supply, compatible with USB, RS-422, RS-485 standards, with ability to convert single-ended USB signals to the balanced differential RS-422 or RS-485 signals. Converter with active internal automatic transceiver conversion, unique I / O circuit automatic control data flow direction, dispensing with any handshaking signals (such as RTS, DTR, etc. ) and jumper settings to achieve full-duplex (RS-22 ), half-duplex (RS-485) mode switch, plug and play.

RS485-232 converter

Compatible with both RS-232 and RS-485, with ability to convert single-ended RS-232 signal to balanced differential RS-485 signal, extended RS232 communication to 1 km away, and no external power supply needed. Half-duplex (RS-485) mode switch, plug and play. Ensure that it meets all existed communications software and interface hardware, dispensing with any software modification which used for previous RS232 working mode.

RS232-USB converter

RS232-USB converter is especially for different computer communication series, external devices have the remote data communications between smart devices, a standard serial interface conversion to each other. It is mainly used for the remote communication between the host computers, the host computer and between peripheral point to point. Commonly used in industrial automation and control systems, mobile control communications and power equipments monitoring communications systems.

PRODUCT DISPLAY:
MODEL SPECIFICATION:

APPLICATION AREAS:

² Stand alone photovoltaic power station
² Stand alone domestic household photovoltaic power system
² Coastal islands, remote mountainous, border posts for regions shortage of or without electricity.
² Government demonstration projects, landscape lighting project, street light project etc.
² GSM base stations, expressway and other no-residential regions.

WARM PROMPTS:

Customers, who will order the solar charge controller, need to provide the following information:

² Rated battery voltage
² Rated solar power
² The following value of each solar panel: Vmp(maximum power voltage), Vmc (maximum power current), Voc(open circuit voltage), Isc(short circuit current).

TECHNICAL PARAMETERS:

Rated Solar Power 3kW
Control Mode PWM
Display Mode LCD
Display Parameters PV Voltage\PV Charge Current, PV Power, Battery Voltage
Working Temperature & Humidity
-20~+50/35~85%RH(Without Condensation)
Temperature Compensation(optional)
4mV//2V, 35+80, Precision: ± 1
Communication Mode(optional)
RS232\RS485\RJ45\GPRS. etc.

Protection Function
Solar reverse charge protection, Solar reverse connection protection, Battery over charge protection, Battery reverse connection protection, Lightning protection.