Generator Manufacturers and Factories

Home Generator Products 235W Polycrystalline Solar Module (JHM235P-60)

235W Polycrystalline Solar Module (JHM235P-60)

235W Polycrystalline Solar Module (JHM235P-60)
Price: Negotiable
Trade Terms: CIF
Min Order: 50/Piece
Pay Type: L/C,T/T
1. Solar panel/solar module/PV module/produced with high conversion effeciency
2. High quality of TPT, EVA, Tempered glass, aluminum frame to laminate solar panels and waterproof junction box and label;
3. We laminate solar panels from 55W-280W, with mono crystalline and poly crystalline solar cells.
4. We have TUV, ISO 9001/14001, CE, CEC certificate and so on.
TYPE JHM230P-60
Nominal Output(Pmax) 210 215 220 225 230 235 240 245 250
Optimum Operating Voltage(Vmp) 29.0 29.0 29.0 29.5 29.5 30.0 30.0 30.0 30.5
Optimum Operating Current(Imp) 7.24 7.41 7.59 7.63 7.80 7.83 8.00 8.17 8.20
Open Circuit Voltage(Voc) 36.0 36.0 36.0 36.6 36.6 37.2 37.2 37.2 37.8
Short Circuit Current(Isc) 7.82 8.01 8.19 8.24 8.42 8.46 8.65 8.74 8.85
Operating Temperature -40° C~+85° C
Maximum System Voltage 1000V DC
Maximum Series Fuse Rating 15A
Power Tolerance +5W
(Standard Test Conditions): Irradiance 1000W/m² , Module Temperature 25° C, Air Mass 1.5
TEMPERATURE   CHARACTERISTICS
NOCT 45± 2° C
Temperature Coefficient of Pmax -0.47%/° C
Temperature Coefficient of Voc -0.351%/° C
Temperature Coefficient of Isc 0.035%/° C
Nominal Operation Cell Temperature Sun 800W/m² , Air 20° C, Wind speed 1m/s
Mechanical Data
Cell Type Poly-crystalline
Cell Arrangement 60(6x10) Polycrystalline cells 156mm
Dimensions 1650 x 992 x 50 mm
Weight 19.5Kg
Front Cover 3.2mm thick, low iron tempered glass
Frame Material Anodized aluminium alloy
 
Performance
Warranty 90% power output over 10 years
80% power output over 25 years
Free from defects in materials and workmanship for 5 years
Prod Model: JHM235P-60
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Zhejiang Juhong PV Technology Co., Ltd. is a R& D and manufacturing photovoltaic product company with advanced international level. It aims at R&D and manufactureing products friendly to the environment and promoting the application of the renewable energy.

The factory was founded in September in 2010. It covers 22, 000 square meters and its workshop exceed 15, 000 square meters, including a group of engineers and managers with rich experiences in photovoltaic industry.

Now the annual capacity is silicon solar modules are 100MW crystal silicon solar battery 100MW.

At present, the average efficiency of our mass production has been among first class international level. It has been cooperating with research institutes home and abroad to achieve higher efficiency. It not only engages in photovoltaic products R&D, but promoting the application.

Juhong realizes industrialization and modernization accelerate consuming limited natural resources. Photovoltaic products are important to the environment protection as a non-pollution and renewable energy source. We will try hard to promote the application of photovoltaic energy in more districts and countries globally and take it as a solemn responsibility.

Send your message to this manufacturer

  • Zhejiang Juhong PV Technology Co., Ltd.

More >

Other Generator Products with This Manufacturers

About Us Generator Products Generator Manufacturers Hot Generator Generator News Generator Trade Shows Site Partners Contact Us Sitemap