200kw-2000kw CHP Cchp Gas Cogeneration Generator Power Plant
Price: |
US $ 10000.00-500000.00/Piece |
Trade Terms: |
FOB,CFR,CIF |
Min Order: |
1/Piece |
Pay Type: |
L/C,T/T |
200kw-2000kw CHP CCHP Gas Cogeneration Generator Power Plant
Applied gas:
Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc
Acceptable fuel gas pressure: 5~12kPa
CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%
Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )
H2S content≤ 200mg/Nm³
NH3 content≤ 20mg/Nm³
Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M
Water content≤ 40g/Nm³ , no free water.
Acceptable working conditions:
Ambient temperature: -10° C~+40° C
(antifreeze or preheater needed for below 0° C)
Relative humidity: <90%(20° C)
Altitude: ≤ 1000m
Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.
Standard Scope of Supply:
1. Brand new gas engine, 90% parts include engine body, crank shaft, cam shaft, piston, cylinder head, etc made by US Googol with best quality
2. Brand new brushless France Meccalte, Leroy Somer, Stamford alternator
3. Rating: 3 phases 4 lines. 400/230V, 50 HZ, 1500rpm, 0.8PF, IP22-23, Insulation class H (60Hz 1200RPM option)4. Radiator for 40° C/50° C ambient temperature
5. Ignition system adopted Germany Motortech
6. Emergency stop mounted
7. Battery, Battery cable and Battery charger
8. Standard tool box9. Standard Accessory for installation (include bellows, silencer, flange, asbestos pad, Anti-rust water, screw )
10. Gas Train include Regulator valve, Electromagnetic Valve, Fire arrestor, Ball Valve (Chinese brand)The range for the module CHP:1. CHP unitEngine designed to work on biogas and a synchronous generator that allows parallel operation of power grid. Unit can operate continuously with load from 50% to 100% nominal power.2. Container - enabling the reduction the level of noise to 65 dB - distance 10m.3. Process heat units - exchangers system with the necessary piping, valves, circulation pumps and automatic control system with the task of receiving heat from the cooling unit (lubricating oil, cooling mixture, the engine block) and flue gas and transfer it to the water heater.4. Emergency cooling system with radiator - the purpose is to remove the heat from the cooling unit. Control of the cooler will be Executed by automatic control unit of the CHP.5. Cooling unit of air - fuel - with the purpose of removal of heat resulting from compressing a mixture of air and gas and precipitated it on the radiator. Control of the radiator will be done automatically from the control unit of the CHP.6. Ventilation system -providing the required amount of air supply (air fan,temperature sensor, acoustic silencers) for the combustion and heat removal emitted by the radiation unit.7. Lubrication system -leading to aggregate the required amount of oil (oil pump, steering pump oil) together with the fresh oil tank.8. Gas supply line - the security and control system of biogas pressure (safety valve, set of valves electromagnetic sensors, pressure regulator zero pressure),9. Flue gas installation - the chimney, bypass of the exhaust and silencer on the exhaust10. Active gas detection system - gas sensor inside the container with the shut-off valve on the line biogas in a cabinet on the wall of the container.11. Supply and installation of cabinets HAS - Control Module synchronization and security to work with the power grid, executing the following security features:? under-and over frequency? under-and over voltage? Network synchronization and monitoring of the generator,? Adjustable output power when excessive temperature of the intake air,? Control of auxiliary drives, pumps cooling circuit shunt unit, cooling fan module and Shutter outside air and heat recovery from the air ejector, control devices for grease injection, speed control, fuel injection, gas installation, battery charger, start, US Googol Gas GeneratorsGenset Model |
| HGGM160 | HGGM200 | HGGM300 | HGGM360 | HGGM500 | HGGM800 | HGGM1200 | HGGM1500 | Engine Model |
| RTA780G1 | RTA890G1 | RTA1120G1 | RTA1340G1 | JTA2160G1 | JTA3240G1 | JTA4320G1 | JTA5400G1 | Speed | rpm | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | Frequency | Hz | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | Generator Output (COP) | kW | 160 | 200 | 300 | 360 | 500 | 800 | 1200 | 1500 | Typical Generator Efficiency |
| 93.5% | 94.0% | 94.5% | 95.0% | 95.0% | 95.5% | 95.8% | 96.0% | Power Factor |
| 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | Engine Output (COP) | kW | 195 | 235 | 348 | 410 | 600 | 890 | 1315 | 1708 | BMEP for Continually Output | bar | 9.36 | 14.50 | 14.50 | 15.30 | 12.98 | 11.48 | 14.20 | 13.56 | Engine Parameter |
|
|
|
|
|
|
|
|
| Configuration |
| In line | Vee | Vee | Vee | Vee | Vee | Vee | Vee | No. of Cylinders |
| 6 | 8 | 10 | 12 | 8 | 12 | 16 | 20 | Displacement | l | 12.8 | 14.6 | 18.3 | 21.9 | 35.4 | 53.1 | 70.8 | 88.5 | Bore | mm | 128 | 128 | 128 | 128 | 170 | 170 | 170 | 170 | Stroke | mm | 166 | 142 | 142 | 142 | 195 | 195 | 195 | 195 | Compression Ratio |
| 121:1 | 12:1 | 12:1 | 12:1 | 12:1 | 12:1 | 12:1 | 12:1 | Piston Speed | m/s | 8.3 | 7.1 | 7.1 | 7.1 | 9.75 | 9.75 | 9.75 | 9.75 | Static Speed Droop |
| ≤ 5% | ≤ 5% | ≤ 5% | ≤ 5% | ≤ 5% | ≤ 5% | ≤ 5% | ≤ 5% | Number of Flywheel Teeth |
| 160 | 160 | 160 | 160 | 218 | 218 | 218 | 218 | Flywheel House Size |
| SAE1-14 | SAE1-14 | SAE1-14 | SAE1-14 | SAE00-18 | SAE00-21 | SAE00-21 | SAE00-21 | System Parameter |
|
|
|
|
|
|
|
|
| Lube Oil Specification |
| API-CF4 | API-CF4 | API-CF4 | API-CF4 | API-CF4 | API-CF4 | API-CF4 | API-CF4 | Oil Capacity | l | 40 | 32 | 40 | 45 | 160 | 180 | 240 | 300 | Max. Premissiable Oil Temperature | °C | 110 | 110 | 110 | 110 | 110 | 110 | 110 | 110 | Oil Pressure Warning | kPa | 200 | 200 | 200 | 200 | 300 | 300 | 300 | 300 | Oil Pressure Shutdown | kPa | 160 | 160 | 160 | 160 | 200 | 200 | 200 | 200 | Coolant Capacity for Engine | l | 18 | 20 | 21 | 23 | 70 | 100 | 140 | 200 | Max. Prenissiable Temperature | °C | 90 | 90 | 90 | 90 | 82 | 82 | 82 | 82 | Max. Coolant Warning Temperature | °C | 95 | 95 | 95 | 95 | 85 | 85 | 85 | 85 | Max. Coolant Shutdown Temperature | °C | 105 | 105 | 105 | 105 | 90 | 90 | 90 | 90 | Thermostat Open Temperature | °C | 82 | 71 | 71 | 71 | 71 | 71 | 71 | 71 | Flow of Coolant pump | m³/h | 19.7 | 26 | 26 | 26 | 2*43 | 2*49 | 2*49 | 2*60 | Max. Intake Restriction | KPa | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | Max. Exhaust Temperature | °C | 580 | 580 | 580 | 580 | 580 | 580 | 580 | 580 | Max. Exhaust Back Pressure | Kpa | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | Exhaust Flange Diameter | mm | 1*125 | 2*100 | 2*100 | 2*100 | 1*250 | 1*250 | 2*250 | 2*250 | Charging Alternator Capacity | A | 35 | 35 | 35 | 35 | 55 | 55 | 55 | 55 | Starting Voltage | V | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | Thermal Balance |
|
|
|
|
|
|
|
|
| Electrical Power | kW | 160 | 200 | 300 | 360 | 500 | 800 | 1200 | 1500 | Thermal Output | ± 8% kW | 164 | 205 | 311 | 378 | 538 | 830 | 1232 | 1518 | Electrical Efficiency | % | 40 | 40 | 40 | 40 | 40 | 40.5 | 40.9 | 41 | Thermal Efficiency | % | 41 | 41 | 41.5 | 42 | 43 | 42 | 42 | 41.5 | Total Efficiency | % | 81 | 81 | 81.5 | 82 | 83 | 82.5 | 82.9 | 82.5 | Genset Dimension |
|
|
|
|
|
|
|
|
| Length | mm | 3100 | 3300 | 3500 | 3600 | 4600 | 5100 | 6000 | 6500 | Width | mm | 1300 | 1500 | 1500 | 1500 | 2190 | 2190 | 2600 | 2600 | Height | mm | 1500 | 1800 | 1800 | 1800 | 2300 | 2600 | 2700 | 2800 | Genset Weight | kg | 2500 | 3500 | 3900 | 4100 | 7000 | 9000 | 13200 | 17500 |
|
Prod Model: |
CHP CCHP |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Gas Engine: |
Googol J , R Series |
Fuel: |
Natural Gas / Bio-Gas/ Dual Gas |
Alternator: |
Marathon, Stamford, Leroy Somer, Engga |
Controller: |
Deif, Comap, Deepsea ,etc |
Ignition System: |
German Motortech |
Air Ratio: |
1.6-1.7 |
Generator Electric Effieicncy: |
36-40% |
Speed & Frequency: |
50/60Hz,1000/1200/1500/1800rpm |
Generator Power Range: |
200kw-200kw |
Model Option: |
Silent Canopy, CHP, Cchp, Remote Radiator |
Gas Source: |
Gas |
Guangdong Honny Power-tech Co., Ltd was founded in year 1992, and has been one of the leading power generation solutions and manufactures in China.We specialize in assembly, design, sales, installation, maintenance, and service of power generators.Honny owns strong technical team who widely design and install engineering for different standby power supplying requirement.As a starting point with providing most suitable standby power supplying solution, we perform special design and manufacturing for each project.In order to providing fast and convenient service support, with 20 years of continuous development, Honny set up 2 wholly-owned large-scale manufacturing factories, 2 R&D design centers and 41 wholly-owned sale and service offices in south China, east China, northeast China, north China, northwest China and southwest China area.The total business area is up to 250, 000 square meters, nearly 1, 000 employees and annual sales of more than 500 million RMB.
In order to continuously create more value for customers, Honny the first in generator field to establish exclusive service brand "Honny quality care", through setting up E-office system and Honny institute, regular free technical training, regular customers return visiting, information management for each customer, regular draw up training manual follow with the generator field status, establish a strong service network and a series of activities to ensure every customer with enjoying standard, intimate, fast Honny quality care services.
For keeping our constant competitive advantage, in the past 10 years, we invest much to overcome difficulties and obstacles, devote themselves to a number of ongoing new product research and development.We carry out several technical cooperation and joint product research and development work with China South Locomotive Group, France's Total Group(TOTAL), China's first aircraft institute, and many global leading engine parts manufacturers.Among the products, the large capacity AC alternators with independent intellectual property rights by Honny had been used in 2005.Honny's independent intellectual property rights with China's first generation, gas compression multi-functional integrated equipment successfully developed and delivered to users in 2007.With our own intellectual property rights, 275-2200KW high-horsepower high-speed diesel engines gradually will be put into the market in the second quarter of 2010.The success of these products has been developed to effectively fill the gaps in the domestic industry and to become China's ability to master the core technology and equipment manufacturing.
Under 18 years of tireless work and painstaking efforts, Honny reelected for five consecutive years in China's best power solutions integrator from 2004 to 2008, and won the Guangdong high-tech enterprises, Guangdong Famous Brand, Guangdong Top Brand, Dongguan Top 50 private enterprises in 2006-2008 for 3 consecutive years, Dongguan enterprise of observing contract and valuing credit in 2006-2008 for 3 consecutive years, Dongguan patent nurturing enterprise, Dongguan private technology enterprises, the founder Wen Guosheng won the Dongguan inaugural honor outstanding private entrepreneurs.
To promote the health of long-term development of enterprises, Honny launched the "talent, brand, culture, " three major development strategies in 2007.With the "Good attitude, promote development" concept, Honny is committed to building the greatest power solutions provider in the world.